Home > Products > Precision Injection Mould > Blade Wheel Precision Injection Mould / Cold Runner Fan Gate
Blade Wheel Precision Injection Mould / Cold Runner Fan Gate
- 0 Metric Ton / Metric Tons per Month
- T/T L/C D/P D/A
- 7 days
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Protecting Products
- SIlica Gel Desiccant Fine Pore for Drying Flowers Moisture Damage
- Electronics Cars Fashion Collectables Strong OEM Capacity Silica Gel Desiccant Suppliers
- Hengyuan OEM production regenerating silica gel desiccant
- silica gel absorbent capacity in bags moisture absorbent
- 10 grams silica gel in bags moisture absorbent
Product Details
Brand Name: | SHINY | Place of Origin: | China | Model Number: | SY-12017 |
Product Description
Certification:ISO9001: 2008
Blade Wheel Precision Injection Mould / Cold Runner Fan Gate
Quick Detail:
1. The part name: Blade wheel(plastic injection mold)
2. Plastic material: PA
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Point-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO, Customize according to customers\' requirements.
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Blade wheel
Mold type: Plastic Injection Mould with cold runner system
Part Material: PA
Locating ring Dimension: Ф100
KO Pattern: 200*200
Sprue Radius: SR 19
Ejection type: ejection pins.
Mold construction description: cold runner system with point gate, 2 plates, there are many ribs in the product, which weight is very accurate, so many size tolerances are no more than 0.02mm. the finish surface of those ribs must meet mirror surface and can not have any deformation.
This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport, Sliver Marks, Gas Trap Effect, Visible Ejector Marks,Deformation,Short shot Filling, Burnt Streaks, Sink Marks,Flash,Over dimension, Under dimension, Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-2.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
Blade wheel(plastic injection mold) |
Plastic material |
PA,PP,PE,PA,PC,ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
3.mould base material |
S50C,P20,S136 etc |
4.cavity material |
H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
6.cavity number |
1 |
7.runner |
Cold runner |
8.gate type |
Point-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires. |
9.mould weight |
220 kg |
10. mould base standard |
LKM Local standard, DME,HASCO,Customize according to customers\' requirements |
11.cycle time |
28 second |
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
software |
Auto CAD ,UG, Pro-E ,Solid Works,Moldflow,etc. |
14. File Formats |
Auto CAD (DWG), DXF, JPG or JEPG, PDF, Pro-E or Pro/Engineer(DRW,PRT), IGES, STEP,XTL,UG parts etc. |
Contact Us
- SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
- Contact nameJim Lee
- Phone86-769-85355698
- AddressNO.4, XinFeng Rd, Shang sha Community, Chang,an Town Ankang,Shaanxi
Cold Runner Mold | Hot Runner Injection Mould | Injection Mould Parts | Plastic Injection Mould |
Precision Injection Mould |
- Absorbent paper for flower pressing A4 A5
- Zeolite 4A molecular sieves for liquid coats and paints deep dehydrating
- oxygen purification special molecular sieves adsorbents for nitrogen separation for oxygen generators
- zeolite molecular sieves 4A for liquid petroleum gas drying and purification
- zeolite molecular sieves zeolite adsorbents for natural gas deep drying and purification
- 13X-HP molecular sieves for PSA nitrogen and H2S co2 adsorption separation
- HAISU Polyamide for column chromatography, Polyamide6 100-2000mesh 75-150μm
- HAISU Polyamide for column chromatography, Polyamide6 80-120mesh 120-180μm
- HAISU Polyamide for column chromatography, Polyamide6 80-100mesh 150-180μm
- HAISU Polyamide for column chromatography, Polyamide6 60-100mesh 150-250μm
- HAISU Polyamide for column chromatography, Polyamide6 30-60mesh 250-550μm
- HAISU Polyamide for column chromatography, Polyamide6 13-40mesh 380-1150μm
- HAISU TLC Plates, Glass-Backed, Basic Alumina, 250 µm, 2.5 x8 cm
- HAISU TLC Plates, Glass-Backed, Basic Alumina, 250 µm, 2.5 x10 cm
- HAISU TLC Plates, Glass-Backed, Basic Alumina, 250 µm, 5 x10 cm
- HAISU TLC Plates, Glass-Backed, Basic Alumina, 250 µm, 5 x20 cm
- HAISU TLC Plates, Glass-Backed, Basic Alumina, 250 µm, 10 x 10 cm
- HAISU TLC Plates, Glass-Backed, Basic Alumina, 250 µm, 10 x 20 cm
- HAISU TLC Plates, Glass-Backed, Basic Alumina, 250 µm, 20 x 20 cm
- HAISU TLC Plates, Aluminum-Backed, C18 , 150 µm, 5 x 7.5 cm, F254
- HAISU TLC Plates, Aluminum-Backed, C18 , 150 µm, 20 x 20 cm, F254
- HAISU TLC Plates, Glass-Backed, Neutral Alumina, 250 µm, 5 x 20 cm, G
- HAISU TLC Plates, Glass-Backed, Neutral Alumina, 250 µm, 5x 10 cm, G
- HAISU TLC Plates, Glass-Backed, Neutral Alumina, 250 µm, 10x 10 cm, G
Popular Searches
- caustic soda flake
- sodium hydroxide
- caustic soda
- chelate agent
- Activated Carbon
- activated charcoal
- active carbon
- anthracite filter media
- Granular Activated Carbon
- Coconut Shell Activated Carbon
- Powder Activated Carbon
- Nut Shell Activated Carbon
- Honeycomb Activated Carbon
- Coal Activated Carbon
- Wood Activated Carbon
- Activated Charcoal Carbon
Find Similar Products By Category
- Chemicals > Catalysts & Chemical Auxiliary Agents > Chemical Auxiliary Agent
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jim Lee
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-