- GSK CNC Equipment Co., Ltd.
- China Manufacturer with main products:GSK980TDa CNC lathe controller. GSK218M CNC Milling & machining center controller. GSK983M CNC Milling & machining center controller: DA98B Series Feed Axis AC Servo Motor and Driver(Amplifier). CNC lathes ,CNC milling machines ,Machining center
Home > Products > CNC system > GSK983M Milling CNC System
GSK983M Milling CNC System
- 60000 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
- Internal gear 40cr 41A0076 for Liugong loader parts ,axle parts
- Liugong Wheel loader parts Liugong spare parts SP104817 Gland
- Liugong Spare parts Castle nut 03B0050 Standard parts for Liugong Wheel loader parts
- Conical roller bearing 23B0019 Standard parts for Liugong Wheel loader parts
- Liugong spare parts flasher relay 31B0005 fpr Liugong Wheel loader parts
- Air tank assembly ,pressure controller 13C0015 for Liugong Wheel loader parts
Product Details
Place of Origin: | China | Model Number: | GSK983M |
Product Description
GSK983M is a high cost-performance and high reliable CNC developed especially for high speed, high precision and high efficient machining. Due to the applied high speed micro processor and high speed and precision servo system as well as sufficient CNC and high speed PLC functions, the machining efficiency has truly realized a higher standard.
High precision machining
The high precision and high resonance position control has been realized by high performance position closed loop control chip and high precision position detecting components.
The mechanical errors in transmission chains such as pitch error of ball screw can be remedied by pitch memory error compensation.
Feedrate override can be automatically adjusted in the corner contour machining.
High speed machining
When the system resolution is 1μm, the highest feedrate can reach 240m /min which is suitable for the control of milling press, MCs, engraving machines and super precision machine tools. The continuous high speed machining of micro block is realized by the distributed processing of multi-high speed CPU. The super processing capability of 1000 instruction words per second is especially suitable for the machining of high speed mould, auto parts and the control of woodworkers and laser machines.
High speed DNC functions
The specially developed high speed DNC buffer interface realizes the high speed DNC machining by the connection to PC or U disk at the baud rate as high as 115200 .
Sufficient control functions
It has the functions of maximum 5 feeding axes plus 1 spindle control, cutting tools life management, scaling, coordinate system rotation, complex canned cycle, background editing, graphics display and special user macro program that can easily carry out some special machining.
Powerful built-in PLC
The built-in sequence control for machine and the large PLC capacity for peripherals have greatly simplified the strong power design.
PLC-A 2000 steps PLC-B 12000 steps
Smart CNC
It adopts the latest high integral FPGA, CPLD chips and surface sticking adornment techniques which greatly reduces the dimensions of the control unit. And the LCD displayer adopted realizes the thin model of display unit.
Module I/O
The module design adopts I/O unit which can be paralleled by requirement with maximum (input/output) points are 192/128. It can be fixed on the standard DIN rail to directly drive the load such as contactor, which makes the strong power design much simple and the space taken up is much more reduced.
The wires from CNC to strong power plate are much more saved through the connection of the high speed serial communication ports with CNC.
The machine operation panel
It has maximum 64 mechanical keys with a LED indicator for each. Their function specified by PLC programming and also they can correspondingly connect the switches of feedrate override, spindle override, MPG override and coordinate axis.
Separating structure:
Connect CNC by the high speed serial communication ports to save the wire.
NC function |
||
Controlled axis |
Controlled axis and link axis: up to 5 feed axes, 1 spindle and 5 link axes |
|
Interpolation method: linear(G01), arc(G02, G03),sine(G07) |
||
Max. stroke: metric:±99999.999mm;inch:±9999.9999inch |
||
|
Least input increment:0.001mm/metric 0.0001inch/inch |
|
Least increment:X axis:0.001mm/metric 0.0001inch/inch |
||
Max. traverse rate |
60,000mm/min or 2400inch/min |
|
Max. feedrate |
G94:30,000mm/min or 1200.00inch /min |
|
G95: 500.00mm/rev or 50.0000inch/rev |
||
Automatic acceleration/deceleration: the system automatically executes the linear acceleration/deceleration to shorten the positioning time when the rapid feed is executed in Jog or Auto mode |
||
Automatic acceleration/deceleration in cutting feed mode: the exponential automatic acceleration/ deceleration is executed in the cutting feed or manual continuous feed mode, and its time constant can be set by the related parameters from 8ms to 4000ms. |
||
Soft tapping function (standard allocation function); rigid tapping function (optional function). |
||
Buffer register: advance to read the commands of the following two blocks to eliminate the interruption of NC command caused by reading the commands to improve the working efficiency. |
||
G commands |
66 kinds of G command: G00, G01, G02, G03, G04, G07, G09, G10, G17, G18, G19, G20, G21, G22, G23, G27, G28, G29, G30, G31, G33, G40, G41, G42, G43, G44, G45, G46, G47, G48, G49, G50, G51, G54, G55, G56, G57, G58, G59, G60, G61, G62, G64, G65, G66, G67, G73, G74, G76, G80, G81, G82, G83, G84, G85, G86, G87, G88, G89, G90, G91 G92, G94, G95, G98, G99 |
|
MSTB function |
Tool function:T2 digit/T4 digit .99 groups tool offset .tool position offset .tool length compensation .tool nose radius compensation B/C |
|
communication input of tool offset value . tool length measure |
||
Spindle function S:S2 digit/ S4 digit A(12 digit BCD output/analog output) .S4 digit B(12 digit BCD output/analog output)(4-grade gear input). max. spindle speed limit. |
||
auxiliary function M:specified by the sequential 2 digits after address M. |
||
The second auxiliary function B: it is specified by the sequential 3 digitals behind B, and BCD signals of the three digitals are transmitted to the machine side. The function is used for the positioning of graduation worktable, |
||
Precision compensation |
stored pitch error compensation: compensate the error caused by machine position to improve the processing precision and the compensated data is stored to the memory. |
|
backlash compensation: compensating the loss momentum of machine |
||
Tool length compensation and tool nose radius compensation:the tool length compensation is executed by G commands(G43,G44,G49)and the tool nose radius compensation by(G40,G41,G42), the compensation value for every tool is stored to the memory. Max. compensation value: ±999.999mm or ±99.9999inch. |
||
Reliability |
emergency stop;overtravel;.stored stroke limit;.NC ready signal;.servo ready signal;.MST functional completion signal;.start signal in automatic run;.automatic running signal;.feed hold indicator signal;.safety door interlock signal; |
|
NC alarm:.program error and operation error;.overtravel error;.servo system error;.connection error, data transmission error between MDI and CRT, PLC error;.memory(ROM and RAM)error; |
||
Self-diagnosis: execute the following checks:system abnormity;.position control abnormity;.servo system abnormity;.CPU abnormity;.ROM abnormity;.RAM abnormity;.data transmission between MDI and the machine operation panel;.RS232 read abnormity;.PC data transmission abnormity and so on. |
||
Operation |
dry run .interlock. single block . optional skip block .manual absolute value ON/OFF .auxiliary function lock(M. S.T lock) |
|
Display |
983M-S: 7.4inch 640×480 homochrome LCD screen |
|
system parameter, diagnosis number, alarm number, macro variable value, tool offset setting, MDI command, MST state . actual axis speed, . machining path graph . Run time and other NC commands and state information |
||
PLC function |
Control method:cycle run; run speed:15us/step for basic command |
|
Input/output:192/128,PLC capacity 2000steps |
||
Development method: PLC command or ladder diagram |
||
Command amount: 34 including 12 basic commands and 22 function commands |
||
DNC function |
Serial DNC can be connected with U disk (option) |
Contact Us
- GSK CNC Equipment Co., Ltd.
- Contact nameHuang Jian
- Phone86-139-25042139
- AddressNo.7,1st Street,Luochong North Road,Luochongwei,Guangzhou,China Weinan,Shaanxi
CNC Lathe | CNC milling machine | CNC system | New product |
- Round Welded Steel Pipes Hot Rolled Black Painted Boiler Pipe Non-oiled Welding Carbon Steel Spiral Weld Pipe
- China Factory Price welded steel pipe carbon steel spiral round steel pipe for oil pipeline constructions
- Large diameter 12m large diameter SSAW Steel Pipe Api welded carbon Spiral Steel Pipe
- Thick Steel Tube Carbon Steel Pipe Helical Seam Spiral Welded Steel Pipe Used For Oil And Gas Pipeline
- High Quality Welded Tube Pipe Spiral Steel Carbon Metal Waterproof Price Pipe Round Structure
- Small and Mini Nylon POM-683/ 688/ 684 /685 /696 /698 Resin Engineering Plastic Bearings
- High Quality POM- 698 8*19*6 mm Bearing Size Pom Plastic Bearing
- Lateral tooth
- hand brake valve
- KFP5171 KYB pump KFP5180
- 705-61-28010 high quality hydraulic pump for D20P-7A
- UH045-5 Hydraulic Pump triple pump 3 stages pump
- 23B-60-11300 Hydraulic Pump Two stages pump for GD625A-1 GD525A-1
- 3G5385 8J8809 - PUMP GROUP-GEAR 8J4513 8J9417 for D3, D3B, D3C, D3C II, D4B, D4C, D4C II, D5C
- 76044269 hydraulic pump for W230 W270 NEW Holland steering pump KFP5190
- 3FE-60-32110 forklift pump assy for FD160E-8 FD160E-7 FD150 FD135 FD115-8 FD100-7 EX50
- power steering pump 609-29300011 for Kato NK450B-3
- OEM pump for komatsu Replacement hoist pump for 930E PB9008
- OEM pump for komatsu 705-56-34490 hydraulic pump fit for HM400-1
- 0510900024 AZPFF-11-016/016RCB2020MB two stages pump Atlas 804
- KFP5163-56CMSSDF KYB KFP51 series for TCM forklift 20Tons
- NDF-76609782 fit for W270 HYDRAULIC GEAR PUMP (OEM) ** Genuine Kayaba
- hydraulic pump For Samsung SL20 wheel loader two stages pump
- 234-60-65400 hydraulic pump fit for GD705A-4 KFP32 series pump
Popular Searches
- Rear Idler
- daemo hydraulic breaker parts
- mitsubishi bulldozer parts dealer
- excavator throttle cable
- hydraulic track link press
- Outer Bushing
- kobelco wiring harness
- caterpillar throttle cable
- hydraulic track pin press
- equipment for transplant trees
- zf wg200 transmission
- zf 6wg200 transmission
- zf transmission 6wg180
- nachi pvd-1b-32p piston pump
- excavator machinery parts
- portable track pin press
Find Similar Products By Category
- Machinery > Engineering & Construction Machinery > Construction Machinery Parts
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Huang Jian
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-