hydraulic press 200ton capacity 200T Accessories : Chain Indexing Unit, Roller Conveyor, Wrench, Track Winder, Tooling

Specifications

Stationary hydraulic press for the assembly/disassembly Track link .
Press link machine 150tons, 200tons ,250tons,300tons,350t

 

Track press machine use instruction

 

1. power input:380V three-phase
2. we must fill antifriction oil into the oil tank before start the operation.
3. Please inspect the motor is under the corotation condition(please check the Motor corotation mark)
4. Up and down board has already tuned,please don’t adjusted casually.
5. When Assemblying the track link section,please adjust the mold according to the link pitch.
6. When disassemblying the track link,please fit the disassembly head in one side of the cylinder,and use the guard to ward off the track link in other side of the cylinder.

 

 

 

 

 

 

 

	Name of commodity	Corresponding to the pics	Specification(mm)	Note
200T Twin Ram  Hydraulic Track Link Press Machine	Twin ram hydraulic machine		1780mm(long)X600mm(width)X1350mm	Motor  5.5kw 220V/380V 50HZ
	Rolling link machine		1300mm(long)X880mm(width)X1300m(height)	Motor 3KW 220V/380V  50HZ
	Frame		2000mm(long)X550mm(width)X800mm(height)	4PC 3 square 1 triangle
	Assembly mold		6pcs 154,171 ,175,190, 203,216,228pitch	154,171 ,175,190,203,216 pitch
	Disassembly mold			2pc 1pc for <203pitch 1pc for >203pitch

It can fix PC60---PC400 ,D20---D355,D9N different kinds of track link

 

Quality can be guarantee 1.5 years , and the quality are tested approved by all the manufactories here .