Water distillation,water distiller, distiller, lab distiller, lab water distiller

Specifications

1.Control without water
2.without water protection function
3.304 steeless steel

 

Type YA·ZDI Stainless Steel Auto-controlling Distilling Series Apparatus

 

 

 

The Stainless Steel Auto-controlling Distilling Series Apparatus is used to produce distilled water for sanitary units.

I. Product Profile

Heat exchanging of steam is a type of reliable distilling method to produce distilled water of high quality recently. Our electric heating distilling apparatus is a kind of new-generation and upgraded product. It is well designed, easy to operate and safe, its control center is made of high –temperature-resisted plastic material which will prevent people from being hurt. Structure of distributaries is applied in the control device, as the result, problems of the former heating distilling apparatus, like complex to operate, easy to overturn and overflow, are avoided. This series of products are made of stainless steel of high quality and the quality of the water confirms to the National Medicine Standard (2000). It is ideal device to produce distilled water of high quality in hospitals, pharmacy, science and research units, chemical industry and food industry.

II. Structural Features

It is mainly composed of vaporizing boiler, condenser and electric device.

a)        The vaporizing boiler is made of stainless steel and the heater at the bottom of the boiler heat the water and produce steam with electricity.

b)        Condenser:  It is made of stainless steel and stainless-steel-made coil pipes are set in it. The distilled water is produced by cooling the steam coming from the vaporizing boiler.

c)        Electric device:  Electric control device is used in this part and the water level in the vaporizing boiler is controlled and the heater will not be damaged even there are no water in the boiler.

Regular Failure Analysis

Situation	Reasons	Solutions
The distilled water is disqualified	1.        There is remain during the processing in the inner side of the pipes 2.        Disqualified water are supplied 3.        Water leakage in the cooler 1.        Prolong the test time and the remain will be rushed away 2.        Qualified water will be supplied 3.        Change the cooler
Electrification of the shell	Grounding wire is lacking for the power supply wire	Add reliable grounding wire
Electrification of the shell when the water is not heated	The heater is broken	Change the heater
Indicator light is not on after the power is on	1.        Input voltage is not normal 2.        Whether the joints in the apparatus are loosen 3.        Indicator light is broken 1.        Input normal voltage 2.        Tighten the joints 3.        Change the indicator light
Much of steam comes out during the operating	Water supply is stopped  or pressure of the cooling water is too low	Raise the pressure of the input water
The working indicator is on when the water level is lower than the alarm line	1.        Water level probe contacts with the shell 2.        The wire connected to the probe is broken and contact with the shell 1.        Calibrate and clean the probe 2.        Repair the broken wire to avoid its contacting with the shell
The power light is on but the working indicator light and water lacking light are off	The relay and the water level circuit board are broken or the joints are loosen	Change the relay and the water level circuit board and tighten the joints

 

 

                  Specifications

model	YA·ZDI-5	YA·ZDI-10	YA·ZDI-20
specification	5 L/h	10 L/h	20L/h
Production per hour	5L	10L	20L
Power	5kw	7.5kw	12kw
Power supply	220V	380V	380V
Weight	9kg	9kg	10kg
volume	830×360×370	830×360×370	900×360×370
Apv.Duc(2002) Ref No	2410273	2410274	2410275