Home > Products > 3.Super abrasive > VCGX110304-LH inserts for aluminium
VCGX110304-LH inserts for aluminium
USD $2 - $3
/ Piece
100 Pieces(Min.Order)
- 10000 Piece / Pieces per Month
- any port in china
- T/T L/C D/P D/A Credit Card PayPal
You May Like
- Zy Super Hard External Turning Tool PCD Wide Edge Commutator Turning Tools
- CNC PCD PCBN Turning Milling Inserts
- sell zhuzhou tungsten carbide cutting tools
- DCMT11T304-TS Carbide Inserts Turning Inserts for Steel and Stainless Steel DCMT Shape
- Single-sided CCMT060204-SM Turning Inserts for Semi Finishing and Finishing Positive Rake Low Cutting Forces
- CNMG120404-TF Rhombic Inserts Positive Rake Angle Varies Along the Edge to Negative Prevent Chipping
Product Details
Place of Origin: | Hunan, China | Brand Name: | zzbetter | Model Number: | carbide inserts for aluminium |
Material: | Tungsten Carbide | Usage: | External Turning Tool | Hardness: | For aluminium |
Coating: | None |
Product Description
VCGX110304-LH inserts for aluminium
Product Description
1.Grade of the carbide inserts for aluminium.
The best grade is YD101 and YD201
YBC151 | substrate with excellent wear-resistance, in combination with MT-Ti(CN), thick layer Al2O3TiN coating. It is an ideal grade for th finishing steel, cast steel and stainless steel under high speed and dry machining. |
YBC251 | Cutting edge with special strength and toughness, in an optimal combination with MT-Ti(CN), thick layer Al2O3, TiN coating. It is a suitable grades for a wide application. It is good for the finishing, semi-finishg and light roughing of steel, cast steel and stainless steel. |
YGC351 | Substrate with high strength and resistance against plastic deformation, in combination with MT-Ti(CN), thick layer Al2O3, TiN coating. It is suitable for light roughing and roughing stell, cast steel and stainless steel. |
YBM151 | Substrate with special structure, in combination with Ti(CN), thin layer AL2O3, TiN coating. With the resistance against diffusion wearness and plastic deformation, it is good for finishing and semi-finishing (turning as well as boring ) of stainless steel. |
YBM251 | Substrate with good toughness and strength, in combination with Ti(CN), thin layer AL2O3 TiN coating. It is a premium grade for semi-finishing to light roughing(turning and boring) of stainless steel at continuous and intermittent machining conditions. |
YBM351 | PVD TiN, TiAIN coated carbide grade with very good strength and impact resistance. It is suitable for roughing turning of stainless steels at low to moderate cutting speed or interrupted cutting, also for high cutting speed and heavy cutting in P30 area. |
YBD051 | CVD coated, substrate can suffer from high temperature withougt thermoplastic deformation. It is best for finishing and semi-finishign machining nodualar cast iron, high intensity forgeable cast iron and grey cast iron. |
YBD151 | Substrate with very good wear resistance, in combination with MT-Ti(CN), thick layer AL2O3, TiN coating. It is the first choice for medium to rough machining of cast iron,nodular cast iron and under high cutting speed. |
YBM252 | PVD TiN, TiAIN coated carbide grade with very good toughness and wer resistance. It is good for finishing turning, boringand ligh milling of stainless steel as well as cast iron, stainless steel and alloyed cast iron. It can also be used for parting and grooving of steel (Low carbon content ) at a low or medium speed. |
YBG201 | PVD TiN coated carbide grade with good toughness and wear resistance. It is good ofr threading and drilling (both peripheral and central inserts) low carbon of steel, stainless steel heat resistance steel and cast irons. |
YB235 | Substrate with very good toughness, in combination with TiN and TiCN coating.Cutting edge with good security. Good for roughing under low moderate cutting speeds. It is suitable for turning, milling,bornning and drilling (with perpheral insert) of steel, austenitic stainless steel and casting steel,. Mainly used for P40 and M35 material. |
YC10 | Carbide grade with high hardness and good toughness, suitable for fine and semi-finishing machining of steel and cast steel, also suitable for copying turning. |
YC40 | Carbide grade with excellent toughness and wear resistance, is suitable for the heavy duty cutting of steel and cast steel. |
YD101 | Carbide grade with fine size grain. Good for fine and semi-finishing machining of cast iron and nonferrous metal. Particularly for machining of Aluminum. |
YD201 | Carbide grade with wear resistance and toughness. Suitable for roughig and semi-finishing machining of cast iron and heart-resistant alloys, nonmetallic materials such as plastic, wood specialloy used in aviation industry with sharp deges inserts. Medium cutting speed and a big feed rate is recommended. |
YNG051 | TiCN based cermet, improves chemicstability and wear-resistant. Using with sharp cutting dege and chip-breaker, it can be got good surface quality whether under conditions of high speed or low speed. It is suitable for finishing machining steel, stainless steel and cast iron. |
YNG151 | Ticn based cermet, with better toughness than YNG051, fine resistant thermoplastic transmutation and resistant built-up. It is suitable for semi-finishing and finishing machining steel, stainless steel and cast iron. |
YCB011 | PCBN-tipped with very high hardness and high heat stability under about 1300℃ of the cutting temperature,.It's mainly suittable for machining hardnened steels of HRC50-60(e.g.carbon tools steels, ball bearing steels, die tool steels and high speed steels etc), gray cast iron cold hard cast irons and Ni-, Co-, Cr-, or Fe- based high temperature alloys. |
YCD011 | PCD tipped inserts with high hardness, good wear-resistance, low friction and heat conductivity. It is mainly suitable for machining non-ferrous metals(E.G.Cu, Al,-allys with high Silicon.) and non-metal materials(e.g.glass fiber, ceramics, reinforced plastic etc). |
2.Products Picture
Contact Us
- Zhuzhou Better Tungsten Carbide Co., Limited
- Contact nameYan Luo
- Phone86-731-28705418
- AddressHuanghe North Road Zhuzhou,Hunan
Product Categories
New Products
- Pentagonal Inserts PNMU0905XNER-GM Carbide Inserts Fast Feed Milling Inserts
- TNGG160401L-S Cermet Turning Insert CNC Finishing Tool Precision Turning
- WNMG080408R-GC 80deg Hexagon Type Negative with Hole External Turning Tool Rough Cutting
- CNMG120416-EN Double-sided 80 Degree Rhombic Inserts with a Special Chipformer for Heavy Machining
- R39011T304M-PM Corner Radius (RE) 0.4 mm Cutting Direction (HAND) Right Hand Insert Width (W1) 6.8 mm
- GDMY840 Double-ended Inserts, Heavy-duty Turning, Profiling and Grooving, Maximum Machining Depth 25 mm
- External Turning Insert SNMG120408-PM Tool CNC Lathe Cutter Tool Carbide Insert Cutting Tools For Steel
- CNMG120404 CNMG120408 CNMM CNMA CNC Lathe Tungsten Carbide Indexable Turning Inserts
- WNMG080404R-S Carbide Turning Insert
- ANHX160708R-M Carbide Milling Insert with Yellow Coated
- SNMX1206ANN-MM Carbide Milling Insert with Yellow Coated
- CNMG190612-PM Carbide Turning Insert with Bi-color
- ADMT160608R Carbide Milling Insert with Bi-color
- RCKT2006MO Carbide Milling Insert with Bi-color
- VNMG160404-MS Carbide Turning Tool Insert
- WNMG080402-MS Carbide Turning Tool Insert
- WNMG080404-MS Carbide Turning Tool Insert
- CCMT060202-LF Carbide Turning Tool Insert
- CNMG120404-MS Carbide Turning Tool Insert
- HEIDENHAIN LC483 670mm ID557647-13 Upgrade model LC485 ID689681-13
- HEIDENHAIN LC483 620mm ID557647-12 Upgrade model LC485 ID689681-12
- HEIDENHAIN LC483 520mm ID557647-10 Upgrade model LC485 ID689681-10
- HEIDENHAIN LC483 520mm ID557647-10 Upgrade model LC485 ID689681-10
- HEIDENHAIN LC483 470mm ID557647-09 Upgrade model LC485 ID689681-09
Popular Searches
- adf
- carbide wood turning tools
- lathe inserts
- Milling Insert
- Carbide Milling Insert
- ceramic lathe tool
- tungsten carbide steel
- cemented carbide inserts
- tungsten milling inserts
- tungsten carbide milling inserts
- carbide mining inserts
- Tungsten Carbide Indexable Insert
- scrap carbide inserts
- Bolt Insert
- buttress threading inserts
- milling inserts
Recommended Products
- Servo-Electric Grippers PGE-15-26
- Phosphating slag paper phosphating slag cloth
- Special filter cloth for phosphating slag removal machine
- Special filter paper for phosphating slag removal machine
- Axial Restraint Coupling
- servo valve SM4-40(40)151-80/40-10-H919H power plant spare parts
- pressure relief valve DBDS10GM10/5 for power generation
- solenoid valve DG4V 3 0A M U D6 60 for power station
- Recirculating oil pump Drive screw HSNH280-43NZ for thermal power plant
- bellows globe valve (welded) WJ25F1.6P for power plant
- custom doghouse rotomolding
- Customize Anodizing Aluminium Precision Milling Turning CNC Machining Parts For Motors
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Machine Tools Accessories > Cutting and Forming Tools > Turning Tool
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Yan Luo
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-