Drywall channel machine Gypsum Wall channel machine CUL channel making machine

Drywall channel machine Gypsum Wall channel machine CUL channel making machine

The normal size of the drywall channel is CU 50 75 100. there are holes and H holes on the drywall channel 50 75 100.

These sizes are normal profiles and sizes of the drywall channel.

below are the pictures of the machine:

Component for Light Weight Steel Frame Roll Forming Machine:

1. Decoiler one set

2. main roll forming machine one set

3. cutting and punching part

4. control box one set

5. hydraulic station

Details information for Light Weight Steel Frame Roll Forming Machine:

Decoiler

Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system

Loading capacity: 1.5T

Uncoiling width: 300mm

Inner diameter: 450-550mm

Main roll forming machine:

Feeding and leveling will level coil to make sure it is neat clean and straight.

Size: 3800х800х1400mm

Weight : 2.6 tons

Voltage:380V/50HZ 3Phase(as customer`s request)

Roller fixer : Guide column

Frame : middle plate welded Memorial arch frame type

Frame thickness:25mm

Speed: 5-50m/min

Drive mode: gear

Material of rollers: GCr12MoV

Material of shafts: 45# steel with tempering

Diameter of shafts: φ40mm

Number of rollers : 10rollers

Main power: 4kw

The machine picture is for your reference

Processing flow diagram of machine

Manual decoiler→ Feeding material into machine →Roll forming machine →Measure length→Hydraulic cutting →Finished Products

 

 

Machine pictures for your reference

1.Technical parameters

Configurations	manual decoiler, guiding platform, main machine of roll forming, cutting device, electric motor, hydraulic station, Delta PLC control system, run out table
Material	Raw material		Galvanized
	Thickness		0.3-0.8 mm
Manual decoiler	Inner Diameter		450-550mm
	Outer Diameter		max 1500mm
	Max Coil width		500mm
	Capacity		3T
Main Forming Machine	Forming steps		12 rollers
	Shaft diameter		40Cr steel with quenched treatment, precision machined, outer diameter: 40mm
	Design type		Guide column
	Machine frame		Memorial arch
	roller material		bearing steel with quenched treatment
	shaft material		45# steel with tempering
	Work speed		20-60m/min
	Transport		reduction gearbox transmission
	Changing size methods		Completely changing the mold linear system
	Structure		independent stand
	Power of main machine		7.5 kw
	Type of cutting and punching		Hydraulic
	Cutting tolerance		±1mm
	Blade and punching material		GCr12MoV quenching treatment 58-60°
	Cutter quantity		1 set
	Working pressure		20MPA
Cutting system	Hydraulic servo tracking cutting		the machine is with servo tracking cutting, the cutting knife can move automaticly with the speed of the machine. so that, the tracking cutting can keep same speed with the main forming speed, and cut the finished products without any stopping.
2. Automatic tracking cutting No. Name Size and mode number note 1 base frame 100*100*6 1   2 Control station   1 Include switch button 3 Hydraulic station 4kw 1   4 Oil pump 63*80*80 1   5 Cooling device 35Hz 1   6 Sensor Npu 2   7 Encoder 600 1 Omron 8 tachometric wheel   2   9 Servo motor 3.9kw 1 GSK 10 Mold Mulfan1 4   11 Lead screw Sfu4020-1230 1 Taiwan 12 Guide HG35-2000 2   13 Slider HGH35cA 4   14 Coupling   4
Control Device	PLC Control	Speed regulation control cabinet
	PLC language	As required
	Touch screen	Delta
	Function	Automatic length and quantity measurement
Other Spare part	Weight	About 8.0 ton
	Dimension	6800*1800*1500 (mm) L x W x H
	Main body color	As required
	Voltage	380v, 50Hz,3 phase(or as required)
	Spare cutting blade	One piece for one size

Machine pictures for your reference

1.Technical parameters

Shearing machine:

Material of blades: Gcr12 quenched

Power supply : hydraulic power

Frame : Pillar style with rack & pinion system

Stroke switch : non-contact photoelectric switch

Electic Control System:

Feature:

1. Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.

2.Other electric element are Delta

3. Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.

Hydraulic Station:

Hydraulic motor Power: 3kw

Hydraulic oil: 46#

There are other similar profiles for the ceiling channel, please check:

If you need any of above profile machines, please feel free contact us:

My contacting information is as below: