- Ningbo Dongda Communication Technology Co., Ltd.
- China Manufacturer with main products:main distribution box ,patch panel ,110 rring block ,FTTH terminal box ,assembly connector ,connector ,fiber optic pigtails ,fiber optic patch cord ,adapter ,fiber optic attenuator ,fiber optic splice enclosure ,fiber optic splitter
Home > Products > Splicing box > Optical fiber splicing box
Optical fiber splicing box
- 0 per Month
- T/T
- ZTE 5928E, RS-5928E, RS-59EC-PWR-AC10, RS-59EC-PWR-DC10, 24 GE RJ45 + 1 expansion card ZTE ZXR10 5928E 5952E 5916E RS-5916E RS-
- ZTE 2952E, RS-2952E-AC, RS-2952E-DC, 48 FE RJ45 4 GE SFP ZTE ZXR10 2952E 2928E 2918E 2910E
- ZTE 3950-28TM, RS-3950-28TM-AC, 24 FE RJ45 + 2 GE SFP + 1 expansion card slot ZTE ZXR10 3950
- ZTE 2950-18TC, RS-2950-18TC-AC, 16 FE RJ45 + 2 GE Combo ZTE ZXR10 2950
- ZTE S2XF48A, 48-port 10GE SFP+ optical interface ZTE ZXR10 8902E 8905E 8908E 8912E RS-8902E RS-8905E RS-8908E RS-8912E
- ZTE 5250-28PM-H, RS-5250-28PM-H, 20 GE RJ45 (POE/POE+) + 4 GE Combo ports + 1 expansion card ZTE ZXR10 5250
Product Details
Brand Name: | DDTX | Place of Origin: | China | Model Number: | NBDD-JTH11 |
Product Description
Cable connecting box, also called the cable connector box and barrel, is the end of the local access cable, and then through the optical fiber jumper access optical switch, prevent the nature of hot and cold, light, oxygen and microbial materials caused by aging, and has excellent mechanical strength, optical cable connector box shell and a rigid body structure able to bear the worst environmental change at the same time, flame retardant, waterproof, shock, impact, stretch and twist protected cable.
Internal structure editor
1 、 support frame: the main part of the internal component.
2 、 fiber optic fixing device: used for fixing fiber cable and base and strengthening of optical fiber cable. First, the cable reinforcement core in the internal fixation; two is the fiber optic cable and supporting frame clamping fixed; three is the optical cable and connector box, the cable in and out with heat shrinkable sheath sealed fixed. [1]
3, the fiber placing device: a sequentially stored optical fiber connector and the remaining fiber, the remaining optical fiber length should be less than 1 meters, the remaining PAN fiber paths of not less than 35mm. Wherein, the accommodating tray is more than four layers, and the capacity is large, and the accommodating disk can be adjusted according to the number of cores connected by the optical fiber cable.
4 、 fiber optic joint protection: after the heat shrinkable protective sleeve is placed in the receiving tray, the fixed clamp on the core can also be fixed by silica gel.
5, cable and connector box sealing of junction cable and at the base of the cable inlet box and cable connector with emery cloth for grinding, polishing the detergent clean, aluminum paste, and then placed in the heat shrinkable tube connector box into the cable, use a blowtorch according to the middle to the ends of the slow heating the heat shrinkable tube, can be completely shrink.
Application editor
The utility model is suitable for the straight through and the branch connection of various structural cables, such as overhead, pipeline, direct buried and other laying modes.
Connection in the terminal room of a structural optical cable.
Optical fiber splicing boxes are usually suitable for outdoor use in indoor or outdoor areas. They are not suitable for outdoor use. If they are to be used, protective measures should be taken. Working temperature: indoor type: -5 DEG C, ~+40 DEG C, outdoor type: -20 DEG C, -+60 DEG C.
Feature editor
The utility model can play the role of protection and continuity, and the box body adopts reinforced plastic, which has the advantages of high strength, corrosion resistance, mature structure, reliable sealing and convenient construction.
Classified editor
According to the optical fiber cable connection mode, it can be divided into straight through type and different type.
Depending on whether the assembly adapter can be assembled, it can be divided into assembly adapter type and non assembly adapter type.
According to the shell material classification, can be divided into plastic shell and metal shell.
Edit by usage
Fiber preparation
1. remove the fiber sheath (if any, please remove the shield and armor), then remove the wrapping layer to expose the loose sleeve, the specific method, according to the optical fiber manufacturer recommended standard method steps, preparation length 3m.
2. Clean the loose sleeve and reinforce the core sheath with detergent, remove the excess filling casing and polish the 150mm length of the fiber sheath with the sand paper provided.
Fiber optic cable installation
1. Select the minimum inner diameter seal ring according to the outer diameter of the optical cable and cover the two sealing rings on the optical fiber cable.
2. Place the cable in the corresponding hole.
3, connection shielding and grounding.
4. Self sealing adhesive tape is wound between the two sealing rings so that the sealing belt is wound to the outer diameter of the sealing ring so as to form a sealing end of the optical fiber cable.
5, the optical fiber sealing end into the optical cable into the hole.
6, through the cable reinforced hose clamps the fixed seat and the cable core is fixed on the bracket, the optical cable connector box base, tighten the screw hose clamps, hose clamps pull tight until now.
7, in the optical cable on the nylon tie tape, cut the remaining length.
8, the rest of the cable hole, please use a plug seal. The same sealing tape is applied to the plug and requires the same as 5.2.4.
9. The reinforcing member is wound on the countersunk head screw of the weld plate support and pressed.
Contact Us
- Ningbo Dongda Communication Technology Co., Ltd.
Fiber box | Splicing box | Optical fiber desktop box |
- FortiGate FortiWiFi 80F Series FG-80F/FG-81F
- 2x2 Magnet Fiber Optical Switch 1550nm
- 1550nm 1x4 Magnet Fiber Optical Switch SM
- 1520-1580nm 1x2 Magnet Fiber Optical Switch
- Magneto optical switch 1XN
- Magneto optical switch 1X1
- Magneto optical switch 1X1
- Magneto optical switch 1X4
- Magneto optical switch 1X2
- MEMS optical attenuator module
- PM MEMS VOA module
- Multi-channel MEMS VOA module
Popular Searches
- Optical Amplifier
- joint closure
- fiber optic
- ftth
- telecommunication
- Camera Dome Enclosure
- video transceiver
- distribution box
- Fiber Optic Equipment
- fusion splicer
- optical fiber splicing machine
- fiber optic fusion splicer
- fiber optic adapter
- optical fiber fusion splicer
- machine fiber optic fusion
- fiber optic splicing kit
Find Similar Products By Category
- Telecommunications > Communication Equipment > Fiber Optic Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-