hand crank dynamo high quality camping flashlight

Specifications

Hand Crank Lantern with hanging handle.
Emergency Camping Lantern
With CE+RoHS+BV+GMC certification

hand crank dynamo high quality camping flashlight

 

Description: 

 

Retractable Dynamo Hand Crank Lantern with hanging handle.

Emergency Camping Lantern 

Eco-Friendly , Portable& Durable 

With CE+RoHS+BV+GMC certification

Rainproof

Material: ABS

Size:62*131mm

Weight: 191.2g

 

Packaging & Delivery

Packaging Details: Blister Pack PDQ usually the best popularity with high quantity

Delivery Detail:    30 Days

 

Specifications 

--The Retractable Dynamo Hand Crank Lantern adopts the principle of cranking for power generation.Then changing the alternating current into DC after commutating and voltage stabilizing which to charge its built in 300mAh, 3.6V battery. Charge this product via external 5 V adapter. The indicator will glow while charging and while being fully charged.

---Switch models: Low-brightness lighting, high-brightness lighting, red LED lighting, red LEDs SOS flashing.

--Cranking for power, no batteries are required; energy saving, environmental friendly, economical, and safety.

--Simple outline and delicate appearance,low noise but high efficiency; long working time.

--Ultra bright LED are guaranteed to brighten your way, It can be handed by the handle.

 

Main Technical Parameters

 

1) Lighting :

The Max. Luminous Flux of high-brightness when fully charged	≥22Lm
The Max. Luminous Flux of low-brightness when fully charged	≥7Lm
The Max. Luminous Flux of red LED lighting when fully charged	≥0.4Lm
High-brightness lighting time after 1 minute cranking	≥9Min
Low-brightness lighting time after 1 minute cranking	≥35Min
Red LEDs lighting time after 1 minute cranking	≥9Min
Red LEDs flashing time after 1minutes cranking	≥23Min
High-brightness lighting time after being fully charged	≥2Hr.
Low-brightness lighting time after being fully charged	≥6.5Hr.
Red LEDs lighting time after being fully charged	≥4.5Hr.
Red LEDs flashing time after being fully charged	≥11Hr.

 

 

2) Parameters of external power source

 

Specification of charge connector	DC connector, Φ3.5*Φ1.35
Input voltage	5-5.2V 750Ma
Fully charged time by DC adapter	≤5Hr.
Fully charged time by computer USB port	≤6Hr.

 

 

3) Main parts life-span

 

Switch	≥10000 Times
The whole unit	≥5 Years
The plastic part	≥5 Years

 

 

4) Size and Weight

 

Product size	Φ62*131 mm
Product weight	191.2 g

 

 

5) Others:

 

Specification of built-in battery	300mAh, 3.6 V
Motor	2.5W Brushless
LED	0.5W

 

 

Operation Method

 

1. Lighting:

 

1). Switch models: Low level brightness (0.5W white LEDs)→ high level brightness (0.5W white LEDs) →3 red LEDs→3 red LEDs SOS flashing→ off.

2). Stretching the lampshade, it can be used as a camping lantern, and pull the lampshade back, it can be used as a flashlight.

 

2. Charging operation:

 

1). Charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3

   circles per second to charge its inside battery.(Charge indicator will glow)

2). Charged by external power source: plug in the DC connector into the DC in port of the product, the red indicator will glow while charging and the green indicator will glow while being fully charged.

3. Luminous: the luminous bracelet will glow in the dark or room light.

4. Hanging handle: it can be hanging on the hook or carried.

 

 

Picture for camping flashlight :

 

 

   

 

 

Cautions

 

1. Don’t point at eyes directly so as not to hurt the eyes.

2. Pay attention to the holding gesture when cranking which can protect your finger and nail from hurting. Keep rotating steadily.

3. In order to assure the using life of the battery and the mechanical parts, pls pay attention to the instructions

below:

a) Do not crank it for more than 5 minutes when the power of the battery is enough (lighting normally) and less than 15 minutes when it runs out of power.

b) When the light is dim, it means the battery is lack of power badly, pls turn off the light or crank it for a while.

c) Cranking it as even as possible (keep rotating steadily,2.5 or 3 circles per second is best). Too slowly cranking would make current weak and influence the charging efficiency, and too violent cranking possibly damages the driving system.

d) In order to prolong the lifespan of the battery, you should crank it for at least one minute once a month.

4. Do not place this product in which temperature or humidity is high. Do not drop or hit this product.

5. Turn off the light when charging in order to enhance the efficiency of charging .

6. The product will be a little hot if cranking for a long time.

7. We do not give notice again if the parameter of this product changed.

8. We reserve the final right to interpret this product.