ETCR9100 H/L Voltage Clamp Meter Tester AC 0.00mA~600A33mm

Technical Specifications                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Function	High voltage AC current measurement, low voltage AC current, current leakage measurement, online AC current measurement
Power Supply	DC6V alkaline LR03×4)
Test Mode	Clamp CT, integral approach
Display Mode	4 bit LCD display, with backlight function
LCD Dimension	47mm×28.5mm
Meter Dimension	LWH: 68mm×245mm×40mm
Clamp Dimension	33mm
Sampling Rate	2 times/second
Measurement Scope	0.00mA~600A (50/60Hz automatic)
Resolution	0.01mA
Shift	0.00mA~600A automatic shift
Accuracy                     (23C±5C, below 70%RH)	0.00mA~100.0A:      ±1%±5dgt
	100.0A~600.0A:      ±2%±5dgt
Line Voltage	Below 60KV line test (with 5 insulation rods operation)
Data Memory	99 sets, memory process is shown by MEM , full storage is shown by blinking  FULL
PEAK value maintaining	Automatically maintain the high test value, in usual testing mode, press keyHOLD till the lighting of PEAK, that is, start PEAK to maintain this function.
Data Hold	In usual testing mode, press HOLD key to keep data, shown by “HOLD”
Data Access	“MR” indication, can access to all data
Overflow Display	Over-range overflow function: shown in “OL  A”
Automatic Shutdown	15 minutes after boot
Battery Voltage	When battery voltage is lower than 4.8V, battery voltage is shown in low symbol to remind battery replacement
Meter Weight	Detector: 335g (with battery), the total mass of meter: 2.5kg (including insulation rod and battery)
Working Temperature and Humidity	-25C~40C; below 80%Rh
Storage Temperature and Humidity	-10C~60C; below 70%Rh
Insulation Rod Dimension	φ32mm, 1m/piece (5pieces)
Insulation Strength	AC 100kV/rms (between the 5th insulation rod and high voltage current clamp core)
Structure	Anti-drip type II
Safety Provisions	IEC1010-1, IEC1010-2-032, Pollution Class 2, CAT III(600V), IEC61326(EMC standard)
Accessories	Clamp Meter : 1 piece; meter box: 1 piece; insulation rod (1m): 5 pieces; battery (alkaline battery AAA): 4 pieces