120V Ceramic Igniters for Wood Pellet Burner

Xiamen Green Way is your best choice for high level quality and best price  120V Ceramic Igniters for Wood Pellet  Burner with the advantages of long service time, fast heating rate, energy-efficient and

eco-friendly.

Characteristic

1.High temperature-resistance 120V Ceramic Igniters for Wood Pellet  Burner which can reach

   a permanent working  temperature above 950°C +/-

2.Energy saving, super fast heating-up

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

4.Electrically oxidation and corrosion-resistant

5.High load-bearing capacity(thermal shock resistance, cycles)

6.Customization the igniters according to customers’ specific requirement.

Application

One special application area for Green Way’s high temperature  120V Ceramic Igniters for Wood Pellet  Burner s in heating systems that use solid fuels such as wood pellets as energy source. The

challenge here is to ignite the biomass in a very short time while retaining very low emission values.

This can be perfectly achieved by Green Way’s hot surface ceramic pellet igniter.

120V Ceramic Igniters for Wood Pellet  Burner for pellet boiler need only approx. 1/10 of the

energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 

120 and 200 Watt. Depending on the positioning of the ignition element in the boiler, the ignition

time of approx. 60 seconds is extremely short. This also means minimal emissions!

Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible. 

Mass customization is available.