rough top conveyor belt

rough top conveyor belt

The chevron conveyor belt are used for carrying wet, loose sand and grain materials in bugs. The v-shape of the chevron cleats prevents the material from sliding back. The salient features of the belt are:

• Can carry loose materials at angle of 17-18 and bagged material at 30-35
• Cleat angle and pitch are designed for smooth travel over return idlers
• Cleats and the top cover rubber are mono block molding for strength
• Chevron conveyor belts are used primarily when the angle of incline becomes too steep for a smooth conventional conveyor belt. The belt is fitted with integrally moulded cleats which prevent the material from sliding backwards as would be the case with a smooth surface belt. Different cleat designs allow the carrying of many types of material, from bulk solids to unit loads.
• Application: There are open type and closed type, suitable for bulk or bagged materials such as powder and granule with incline less than 45 C.
• Technical Data of Rubber Cover:
  Tensile Strength: ≥10Mpa
  Elongation at Break: ≥350%
  Adhesive strength between carcass: ≥6.0N/mm
  Adhesive strength between cover and carcass: ≥3.0N/mm
  Elasticity: ≥32%
  Abrasion: ≤200mm3

• Conveyor Belt workshop
• 
•  
•  

• High Quality Control

   

  

 Application

Metallurgy, building materials, power, ports, mining, quarries, sandpits, etc.

• 

• 

   

  the belt can be made into endless belt, the convering rubber can be made into pit, chevron, horizontal, etc.

   

  kinds of our conveyor belt you can choose

   

    

   

  About US

   

   

   

  

   

   

  

  

  Kindly contact us if any questions.

   

   It is our pleasure to be on service of you!