12W PIR LED motion sensor bulb Sensor LED Bulb Medium Screw Base E26/E27 A60 100W Incandescent Replacement

12W PIR LED motion sensor bulb Sensor LED Bulb Medium Screw Base E26/E27 A60 100W Incandescent Replacement

Description                                                                                                                                                      

The LED motion sensor led bulb LED motion sensor led bulb is a new type of LED light with an in-built motion sensor. It only turns on after dark and if movement is detected. As a result, the LED motion sensor led bulb has enormous energy saving potential wherever lights are currently left switched on (whether 24/7, overnight, or even only for a few hours).

The LED motion sensor led bulb works best in areas like entryways, hallways, passageways, stairwells, carports, porches and verandahs. That way you don't have to worry about switching the light on and off every time you pass through.

The LED motion sensor led bulb only works in open fittings. The PIR sensor located at the top of the bulb needs a line-of-sight to the movement in the area. It will not work if it is covered by glass or lamp shade.

Features                                                                                                                                                            

²  AL1070 Pure Aluminum radiator, excellent heat dissipation

²  Use high standard, high quality LM80 passed LED chips

²  Low power consumption, save up to 80% of electricity

²  Smart Multi-sensing technology (motion/light/heat)

²  Auto turn on-off inferred motion detect (Light turns on for 30-90 seconds when motion is detected within 8 meter.)

²  Standard E27/B22 Cap, easy to install

²  Daylight Override Sensor - Only activates when there is not enough natural light present (<10lux )

²  Meet FCC and CE standard-wide voltage range 100-240VAC

Instruction                                                                                                                                                        

Initial Set Up: After switch on the power for the first time, the light will turn on for 1 minute then switch to standby mode.

Standby Mode: Only activates when there is not enough natural light present (<10lux).

Auto Turn On: When motion is detected within a 8 meter range across a detection angle of 120 degrees.

Auto Turn off: When motion is not detected within the area, light will turn off in 30-90 seconds.

Specifiation                                                                                                                                                      

Attention                                                                                                                                                           

²  Do not use in a close fixture.

²  Not a waterproof product, indoor use only.

²  Do not touch the light directly with your hand after hours of working.

²  Do not install near at any heater or other hot products.

About us                                                                                                                                                           

Shenzhen Ledvol Optoelectronics Co., Ltd.  was formerly known as Shenzhen SOM Lighting Co., Ltd, which was founded in July 2010, specialized in LED flood light, LED High bay Light and LED Sensor Light. Certified with ISO9001:2008, we make led lightings of only high quality. Our products have passed PSE, SAA, ERP, FCC, TUV, CE, ROHS certifications.

Our vision is to be a respectable led lighting company offering undisputable service and quality. Our position is to be part of the customer’s team, the customer is a part of ours. 

Certification                                                                                                                                                     

Warranty Terms                                                                                                                                              

We offer a FREE 3 year warranty on  GAP series LED motion sensor led bulb

Contact us                                                                                                                                                        

Shenzhen Ledvol Optoelectronics Co., Ltd.     

No.68, Langrong Road, Dalang, Longhua District, Shenzhen 518109 P.R. China     

TEL:  +86-755-23762745      FAX: +86-755-23762745

Skype:

Web: Http://