Square tungsten carbide cutter/insert with radius edge for wood cutting Quality Choice

Square Tungsten Carbide Cutter/Insert with Radius Edge for Wood Cutting

We stock the standard sizes of Carbide Insert at prices that won't knick your budget.

Long wearing tungsten carbide insert are offered in dozens of standard sizes with two or 

four wear edges, this carbide inserts are the perfect choice for running woods such as Teak,

Hard Maple,Ipe and MDF.

1. Product Introduction:

With an array of tungsten carbide inserts bolted onto the cutterhead for planer, jointer, sharpers and

moulders,  the carbide square knives is widely used for the wood working industry.

2. Product Picture:

Square carbide insert
Square carbide insert with radius edge

3. Product Specification:

--Optional grade for wood tooling

--Square tungsten carbide insert types and size

We stock the most popular sizes of Carbide Square Inserts.

Apart from the standard sizes you will find in this section, we also manufacture custom carbide insert

based on individual specificaitons. 

4. Big Advantages for our tungsten carbide cutter inserts:

1. Longevity.  A single set of carbide inserts will outlast a conventional knife set by approximately

40 times. That’s because each insert is made of advanced quality of carbide raw material and has

four cutting edges. Each edge will last up to 10 times longer than a typical HSS knife-edge. 

2. Jointing manufactured materials.  Carbide inserts allow you to joint manufactured materials, such

as melamine and MDF.

3. Enjoy quick changes. With carbide inserts, knife changes are no longer such an onerous task.

5. Reference Packing:  Our carbide cutter inserts come in plastic boxes of 10 pieces. 

6. Related Products:

6. Company Profile:

Zhuzhou Kerui Cemented Carbide Co., Ltd. was founded in 2005, it is a professional manufacturer of

carbide buttons used for mine and oilfield drill bits, carbide tips used for construction, tunnel boring

and road milling machines. Zhuzhou Kerui obtained the certificates issued by the famous certification

companies BV and TUV.

Quality inspection instruments:

Quality control:

1. All raw materials are tested in terms of density, hardness and T.R.S before use. 

2. Every piece of product goes through in-process and final inspection. 

3. Every batch of product can be traced. 

Certificates: 

Contact:

Ms. Jane Yu

Skype: jane881108

Email: jane at

Tel:+86-731-22278868

Mobile:+86-18373384861