FT-280 automatic door motor for bus

    ♣     FT-280 automatic door motor for bus

The bus door motor for bus consists of two parts- the lower part is a cylinder with cushioning; the upper part is a set of screwing mechanism.

The lower part:in the cylinder the up&down movement of piston realizes close&open operations of door, using the air pressure to drive the screw shaft to lift and drop through the piston movement.

The upper part has three components:

Support:it funcions as 1.the connector between the upper screw mechanism and lower cylinder;2.guiding to the screw shaft working with the spline;3.the bracket of the outer sleeve;4.the primary bearing of the total door weight(thus should be strong enough).

Screw shaft(drive shaft):the priciple part to convert up&down movement to rotating action.

Sleeve asm:rotates along the screw grooves on the screw shaft, driving the arms to swing together.

TT/LC/Western Union

2.What’s the warranty policy?
One year

3.What’s the shipping date?
According to the products.

4.You are trading company or dealer?
As authorized regional dealer we can get the items directly from the factory, also we have the ability to design, manufacture and supply the solutions.

5.Overseas service or not?
Overseas service available.

6.You accept customized products or not?
We have the ability to make the customized products according to the requirements.