Curtis Battery State-of-Charge Instrumentation model 841 for use in material handling vehicles

Curtis offers the widest range of Battery State-of-Charge (BSOC) instruments in the industry and continues to develop new algorithms to improve accuracy as well methods of measuring the state-of-charge of other battery chemistries and alternative fuel sources.  

Curtis Model 841 displays various system parameters, such as battery state-ofcharge, operating hours or maintenance status from a Curtis motor speed controller or other vehicle controller.

841

The Curtis Model 841 is ideal for use in material handling vehicles such as pallet trucks, walkies, stackers and order pickers as well as other equipment with a need to display battery state of charge, operating hours and controller fault codes.

• Attractive, easy-to-read, 8 character dot matrix Liquid Crystal
Display enhances the look of any vehicle.
• Standard models display hours of use, battery state-of-charge
and fault code messages from a Curtis motor speed controller.
• 3 LED’s:
• Green to indicate that hour meter is active.
• Amber to warn of battery state-of-charge lower than 20%
remaining.
• Red to warn that controller fault has occurred or battery stateof-
charge lower than 10% remaining.

• Interfaces directly with Curtis Model EVC255, 1244, 1254
motor controllers and displays various fault codes.
• Relay lift lockout to prevent deep discharging of batteries.
• Can be programmed to work with a variety of Curtis motor
speed controller models as well as controllers of other
manufacturers.
• Molded-in rear Molex style connector provides a low-cost, fast
and reliable installation.
• Front sealed (IP65) for use in harsh environments.

Options
• Heater available for freezer applications.
• Backlighting for reading in low lit environments.
• Module design for efficient, lower cost panel mounting.

• Display:
8-character, alphanumeric, dot-matrix LCD.
• Operating Voltage Range:
80V nominal: 60 - 100 VDC
48V nominal: 36 - 60 VDC
36V nominal: 27 - 45 VDC
24V nominal: 18 - 30 VDC
• Operating Temp. Range:
-40°C to +70°C

• Storage Temp. Range:
-40°C to +80°C
• Shock & Vibration:
Meets SAE J 1378 (Jul 98))
• Enclosure Protection:
IP65 (Face), IP40 (Rear)
• Mating Connector:
Molex 8 pin, 39-01-2085

Company Name: Suzhou Benign Intelligent Equipment Co., Ltd.

Operational Address: 204A, Bldg. A, Founder Tech Park, No. 188, Suhong East Road, Suzhou, Jiangsu, China (Mainland)

Website:

Website on :http://benign.en.

Contact Mr. Benign Chen

Department: Director/CEO/General Manager

Job Title: General Manager

Telephone: 86-0512-62890289

Mobile Phone: 18020285375

Fax: 86-0512-62890289

Zip: 215000

Warranty:  Two year limited warranty from time of delivery.