Silicone defrost heating cable with heat trace cable to pretection drainpipe antifreezing

Silicone defrost heating cable with heat trace cable to pretection drainpipe antifreezing

 Product Modle

Specification

 Applications

In cold storages,after a certain time of operation,there is build up of ice on the cooler fans and a defrosting cycle must take place.

Electrical resistances are inserted between the fans to melt the ice,and the water is collected and passed through drain pipes for disposal.Some waters if the drain pipes are inside the cold storage,so consequently the water may freeze again.To avoid this problem,a drainpipe antifreezing cable is inserted into the pipe.It is switched on only during the defrosting cycle.

Configuration

1)totally waterproof

2)double insulation

3)moulded terminations

4)extremely flexible

Features of the drainpipe antifreezing Cable

Low installation and maintenance cost.

Versatile to accommodate any layout configuration.

Durable construction.

Smart alternative to snow plowing and chemical snow melting.

Note

The heating cable with 50W/m are most commonly used.

For plastic popes however we recommend the use of heaters with 40W/m.

Warning

These cables can not be cut to reduce cold tail length