Alcohol-Soluble Polyurethane Adhesive ink binder/ JN PU-6900B Curing Agent JN PU-6924A

Dear customers from eight corners of the world:
Junneng Chemicals welcome you to our home. Junneng Chemicals has become the flagship company and standard-bearer in Chinese paper chemical industry due to its unwavering adherence to state-of-art products and pursuit of advanced technology and consumer-oriented service, now invites you to visit our gold products.

     JN PU-6924A Alcohol-Soluble Polyurethane Adhesive/ JN PU-6900B Curing Agent

v        Features

This product is suitable for the dry lamination of flexible packages for foods and medicines and so on. It is especially suitable for flexible packages that have a strict standard for composite solvent residue and peculiar smell below 5°C. It has good transparency.

The product uses alcohols as solvents, which are cheap, saves the cost of dry lamination. Alcoholic solvents have low toxicity and less irritation, They significantly improve the working environment. The product containing alcoholic solvents is safe and environmentally friendly. The product is suitable for lamination of films such as BOPP, PA, CPP, PE and PET, etc. It functions well under relatively high temperature.

v       Diluent

Ehanol/ isopropyl alcohol with a purity of more than 99% can be used as the solutions for the adhesive. Solutions of lower purity will make the emulsion have a muddy and whitish appearance, causing negative influences on coating. Ketone volume fractions should be below 0.5% and the volume fractions of aldehydes should be below 0.02% in the solvents.

Hygiene Standards: GB9685-2003 "Hygiene Standards for the Application of Food Containers, Packaging Materials", GB15193-94 "Food Safety Toxicology Evaluation Procedure"

The dilution formula for the adhesives:

                   Weight of adhesive*solid content(%)+weight of curing agent* solid content(%)

Amount of diluents=----------------------------------------------------------------------------

                      Effective adhesive solid content (%)

----   (weight of adhesive + weight of curing agent )

Ⅰ. Standard proportioning ratio and solvent dilution parameter table. (See the table below)

v         Operating condition

Dilution: add enough solvent to the dhesive and stir them thoroughly, then add the curing agent and stir them until the mixture become homogeneous..

Coating: applicable to the coating of any bareback roller and anilox roller, and adjust the line number and the depth of the mesh opening of pressure roller or anilox rolleraccording to the amount of the adhesive the technological process requires .

Operating concentration: the recommended concentration is generally between 20% to 35%, and the optimal concentration is 30%.

Coating weight: between 1.5 g/mm and 3.0 g/mm when coating on dry basis .

Drying :   As long as the lamination speed is guaranteed, the alcohol soluble adhesive will be dry better with an proper increase in the drying tunnel temperature or the air volume for laminators with the external hot air supply. When the drying system is composed of more than three stages, the temperature gradient should be controlled properly with the temperature at the entrance between 55°C and 65°C, and  75~85°Cat the exit.

Laminating pressure and temperature: increase the pressure and temperature of the laminating rolls as much as possible as long as the films are not damaged and the opening capacity of the inner layer is not negatively affected. Temperature is generally controlled between 60~80°C as per different products.

Aging:  The laminated film can be slitted to make bags after aging for 12 to 24 hours in a temperature between 45±5°C , there is no need for ageing or natural ageing is enough for thin package while indoor temperature is higher than 40°C.

This product should be stored in dry, cool and shady places. The base resin has a shelter life of 18 months while the curing agent ten months.

v       Packing specification

The packaging for  JN PU-6924A is 18KG drum.

 The packaging for JN PU-6900B is 3KG/barrel.

Kind reminder: the information above is based on our current knowledge and experience and we guarantee the quality of the product. Yet due to many factors that influence its function, the product is not necessarily applicable on all conditions. Therefore, users of the product should test it in their own lab before using it formally.

Sales Hotline: 400-881-0300   Http://

The process of our international businese