18 FET IRFB4110 INFINEON CONTROLLER (MOTOR WITH HALL SENSORS)

Brief 

Keyword:    18 FET IRFB4110 INFINEON CONTROLLER (MOTOR WITH HALL SENSORS)

We supply high quality Infineon Type controllers fitted with the very best Imported components for critical parts such as International Rectifier Mosfets and Low ESR, high Temperature Imported Capacitors. The Infineon controllers are programmable and have many features that can be implemented such as 3-level programmable speed switch, programmable battery/phase currents, cruise control and re-generative braking. These controllers are well known in the market to discerning customers so have added perceived value. They can also be fitted with the connector for the popular Cycle Analyst and with sufficient order quantity we can also supply a custom wiring loom to give a tidier and more professional installation or fit connectors to your requirements.

Another big plus for these high end Controllers is the massive power handling and reliability they offer in a much smaller package than low end controllers generally available on the market. Our small 6 Fet controller, fitted with genuine imported IRFB4110 Mosfets (not the cheaper, and inferior, fake IR mosfets that are very common in China and can be easily spotted if you know what to look for) has a very safe and conservative battery current rating of 25A and can be used with Battery packs from 36 to 72V with maximum battery voltage of 90V. A low end controller will need at least 12 or more low quality mosfets to supply equivalent power levels but with much less safety margin or reliability, will likely be more than double the size, with limited functionality, cannot be easily re-programmed and are generally limited to a max input voltage of 48V. Our 12 Mosfet IRFB4110 equipped controller has a very conservative continuous battery current rating of 35A, max current of 45A, but many users re-program them for much higher current levels without issues. The heart of a good controller is the components used and these are internationally priced.

18 fet 4110, 36-75V Infineon Controller 

Includes following functions as standard (we strongly recommend our matching throttle are also purchased to make use of all functions and for plug and play simplicity):

• Throttle connection with Integrated push button cruise, separate 3 speed connection (Full and Half Twist include integrated 3Sp and Cruise, Thumb Throttle is not integrated, but still includes all the same functionality with appropriate parts
• Correctly Connected Cycle Analyst plug, with Shunt Value Marked on case for CA Shunt calibration
• Programming header for simple programming flash via USB program cable (program cable is an optional extra)
• E-brake with Motor kill and Regen (jumper enabled)
• Remote low power ignition switch connection (bar mounted power switch available). Zero current drain when low power switch is powered off, so not necesary to disconnect when not in use, avoiding the sparks and damage that the uncontrolled current surge can cause

Fully programmable using the optional USB program cable. The following functions/parameters can be modified:

• Battery and Phase current (inferred, not measured) can be independently adjusted
• Low Voltage Cut
• High Voltage Cut, or regen Voltage Limit
• 3 programmable speed settings
• Various Pedal Assist and Re-Gen braking paramters can be adjusted

Specification:

• 18pcs of Genuine IRFB4110 Mosfets. Just about the best 100V TO-220 Mosfet available
• 100V Rubycon Caps, Max input voltage is recommended 90V (charge voltage)
• Recommended 36-75V operation, 90V max
• 60A Current Limit
• 6mm² (>10AWG) High Temperature Silicone wires used on Phase and Supply cables
• Dimension: 257 * 85 * 45mm
• Weight: 0.84kg

Features

(1). Under-voltage Protection

(2). Overload Protection

(3). Motor Block Protection

(4). Short Circuit Protection

(5). Overheat Protection

(6). Soft-start in 5 seconds

(7). Brake in 3 seconds