Factory direct 12V ultra high sensitivity vibration adjustable delay switch module vibration alarm relay 10A

12V ultra high sensitivity vibration delay module and relay module with delay three in one module,Vibration alarm trigger switch module

Use:
Vibration alarm trigger delay, can be directly used in car alarm,Vibration switch, andA variety of high current, high voltage applications.
Module characteristics:
1Ultra high sensitivityVibration sensor;
2 vibration sensors can be connected in the detection position, length of 5 meters in sensitivity to no effect
3 to provide a variety of power input connection, to meet a variety of different needs;
4 with anti - power supply connected to anti - protection diodes, effective protection of products;
5 with a regulated IC, to provide a stable supply of adequate power;

6, the use of high performance timing CPU design, double PCB board;

7, there is a power indicator (red LED) and switch trigger timing instructions (green LED);

8, the output can be connected to AC 10A 30V or DC 10A 250V load;

9, this module isNormally open type vibration sensorWhen.Vibration transducerWhen the module is started.Light green, LED, relay, time end, green LED off, the relay is released back to the closed end;

10,In the time of the trigger end, in the time of the delay time to receive a vibration trigger signal, the relay has been connected, the relay will not disconnectFlash break,shockTrigger signal after the stop, from the newstartTime, delay time to relay off;

11, there are time potentiometer adjustment time,Product design for 1-180 seconds adjustable, can also be customized time range;

12, timing error in 5%
Module instruction:
Vibration sensorInduction to haveWhen shaking, relayPull, delay start time, at this time, the green lightBright,That is, the public side and often begin to connect,The common end is disconnected from the normally closed end.

Product application:

1, with a variety of other sensor plus relay module, can do a variety of time delay switch, direct with the echange of 220V products;

2, corridor delay switch, delay energy saving products;

3, the ground motion sensor can do all kinds of alarm delay trigger, such as earthquake alarm, anti-theft alarm

4, then vibration sensor can also be applied to auto start automatic trigger control related products;

5, machinery and equipment to stop the delay alarm.

Electrical parameters:
Power supply voltage: 12VDC
Current: more than 100mA
Load: 250V 10A AC or 30V DC 10A
Shipping list:
12V vibration sensor delay module,With ultra high sensitivity vibration sensor.

Diagram of the connection of the vibration time delay switch:

Time delay adjustment potentiometer:

Adjustable time,Reverse timeIncrease time of needle,ShunNeedle reduction time,1-180 seconds can be adjusted, but also can be customized time range

Vibration time delay switchConnection method for controlling 12V alarm:

Vibration time delay switchConnection control method of alternating current:

Relay output terminal Pinout:

The relay control module communication equipment wiring diagram: