WINSUN 1 5V with photoelectric isolation relay module can be set to low level trigger relay 5V relay

The 5V module with photoelectric isolation relay module, can choose the high level trigger orLow level trigger

Need 1 12V photoelectric isolation relay module can open the link below to buy

/item.htm?spm=a1z10.5.w4002-5046909178.17.Rg66Rl&id=25671168695

need1 road5V high power 30A relay module can open the following link to buy

/item.htm?spm=a1z10.3.17-8129598908.23.CJFYUo&id=21843716823&

Need 1 way 5V self lock relay module can open the following link to buy

/item.htm?spm=a1z10.3.17-8129598908.19.CJFYUo&id=21757200001&

Relay output contact with double - line, can withstand large current more secure

Product introduction:

1, this module is in line with international safety standards;

2, the use of pine music authentic relay;

3, with power supply and relay indicator, pull off bright, bright;

4, when the signal input signal, G1 public and K1 often start will lead;

5, can be used as a microcontroller development board module, can be used as a home appliance control;

6, control the DC or AC signals, can control the 220V AC load;

7, there is a K1 normally open and a B1 normally closed contact;

8, blue KF301 terminal connected to the control line is more convenient.

9, H for the high level trigger selection, that is, short connected to the H_IN, H for the high level trigger input

10, L low level trigger selection, that is, short connected to the L_IN, L is lowtriggerInput terminal

11, VCC for the power cathode, GNDNegative electrode for power supply.

On the high level and the low level of the trigger instructions, do not understand the friend please look at:

High level trigger refers to the signal input terminal and the ground between the trigger mode, can be understood as the signal input and VCC cathode short-circuit trigger a way;

Low level trigger refers to the signal input terminal and the voltage between the ground for the OV trigger mode, can be understood as a signal input terminal and GND negative short-circuit trigger a way

1 5V relay module front view:

According to the wiring diagram 1 12V relay module wiring diagram:

The relay output terminal pin is stated as follows:

The above method is equivalent to the following control circuit

Relay module control DC equipment wiring diagram:

Need boes to be able to open the following link to buy

/item.htm?spm=a1z10.3.17.30.2f8689&id=19983664444&

Need the DuPont line of friends, please click the link below to buy:

/item.htm?spm=a1z10.1.4.15.b8529a&id=20218272186

White 4P single cable friends, please click the link below to buy:

/item.htm spm=a1z10.5.w4002-5046909178.32.HRlN5W&id=20882023676?