Roof waterproof projects Liquid rubber waterproof coating

Liquid rubber Waterproof Coating

Non-Solidified rubber bitumen waterproof coating consist of rubber, bitumen and additive,which is always keeping the state of sticky pastes.It is heated to flow at the construction site,then brush on the substrate to form the waterproof layer with good adhesive ability,creeping proprieties and self-healing ability.It can be used as the independent waterproofing level,also can be used together with other membranes as the compound waterproof layer.

Products Feature

1.Never be solidified.Always keep the state of sticky semi-liquid pastes,with properties of creeping,never be solidified,can resist the deformation of substrate.

2.With high adhesion.The paint is always maintain viscosity after construction.

3.With durable sealability.Always keep the excellent properties of creeping,to make sure the substrate will be well sealed under the coating

4.adhesive strength is strong,can adhere to different kinds of substrates and membranes,has excellent binding performance.

5.Pull double duty.It is not only a waterproofing level but also a excellent adhesive level.

6.With excellent “self-healing”characteristics.Even the waterproof level is damaged when it is under construction,it can fix the microcracks itself to keep the integrality of water-resistance layer 

7.Wide range of application.It can be used under normal and low temperature,at the moment of bonding to substrate,it will reach it’s adhesive strength,even brushing before raining.

8.Easy to construct.Both brushing or spraying can be selected during construction,easy to handle and apply.

Storage and Transportation

1.Keep from the rain,exposure,extrusion and crashing during transportation,make sure the package is intact.

2.Should be sealed and stored in warehouse,keeping dry and shady,avoid the sunlight exposure,the storage temperature should not higher than 40°C

3.12 months shelf life if stored as specified 

Use:

This product can be used for waterproofing damp primary treatment conjunctioned with other waterproof materials, it can also be used alone as a waterproof layer.

Flat, stand, cant roof of building, lavatory bath room, swimming pool, gutter and afforest roof. Underground construction: concrete floor, beam, shear wall, retaining wall, elevator shaft, etc. Subway, tunnel, ditch, underground structure, all kinds of pools.

It can be coated according to shape, without omission.

Use guides

Basic requirements: The base must be clean, smooth, no sand, no loose.

Construction: 

Solidify12-24h later for the first time,

you can take the second brush, the direction of brushing should be vertical with the first time.For third time, if you need the rigid course, to enhance the adhesion stress, you can spread clean fine sand on the surface before the film completely solidify. And when the film with sand solidify completely, you can construct for protective layer.

Additional waterproofing layer: internal and external corners,tube root,crack etc. According to engineering demands, brush for once is also ok, protective layer construction can be taken after completely solidification.

 Our company is specialized in the scientific research, development, production, sales, design and construction of waterproof materials,includingSBS/APP bitumen waterproof membrane,EPDM waterproof membrane,TPO waterproof membrane,Polyethylene polymer waterproof material,PVC waterproof membrane,self-adhesive bitumen membrane,drain board and so on.

1.If you need some advises for the waterproof construction, we have the best engineer to serve you.

2.We will guarantee the quality and the competitive price.

3.We will give you the best packaging and safe shipping.

4.If any problem, we will always be right here waiting for you.