Home > Products > centerless grinder > steel wire cnc turning and cutting tools
steel wire cnc turning and cutting tools
- 50 Set / Sets per Month
- Qingdao
- T/T
Product Details
Place of Origin: | Shandong, China | Brand Name: | Haige | Model Number: | WXC100S |
Condition: | New | After-sales Service Provided: | Engineers available to service machinery overseas |
Product Description
Introduction of bar peeling machine
Introduction of composition
There are two main parts --main machine and auxiliary machine
1.Main machine consists of the bed,main bearings,ail/oil lubrication system,front-clamping pinch feeding and rear-clamping extracting,front-guide and middle-rear guide system,main driving system etc.
2.Air/oil lubrication system is specially designed to solve the lubrication of main shaft
bearings with highspeed rotation.It’s composed of pump,oil and air distribution block
and air processing components.
3.Cutting liquid circulation cooling system consist of recycle water pump,pipeline,
nozzle etc.
4.High pressure water pump takes the cutting liquid cooled from reservoir through
pipeline transporting the near to the nozzle of cutter head,until spraying on the
tools and scraps.Then take away most the cutting heat and enter into chip conveyor
mouth of the bottom of cutter head,through the pipeline reflow reservoir for cooling.
5.Chip conveyor is provided by our supplier.The scraps through chip conveyor
mouth to be taken to the chain plate and driving belt move with the scraps.
Finally,the scraps are centralized collection.
6.Hydraulic system consists of pump set of motor,all kinds of control valves,
hydraulic oil tank,hydraulic pipeline etc.Though controlling the cylinders of front-clamping pinch feeding and rearclamping extracting to realize clamping and
loosening for the bar.
7.Electrical system includes power supply system and control system,by 1
power distribution cabinet and 1 button station integrated operation,implement
pinch before and after the main transmission system,feeding system,cooling
system,hydraulic system,the electrical control of chip conveyor and
auxiliary machine.
Product Application Presentation
Main parameters for your reference
MODEL | WXC130S | |
RAW | Diameter Range(mm) | Φ45~Φ130 |
Raw Material Length(mm) | ≥2800 | |
Tensile Strength(Mpa) | ≤1100 | |
Surface Hardness | ≤HB320 | |
Curvature(mm/m) | ≤1.50 | |
Diameter Tolerance | According to GB 702-2004 second group | |
Roundness(mm) | ≤50% of the diameter tolerance | |
Surface Roughness(Ra) | ≤25-50μm | |
FINISHED | Diameter Range | Φ44~Φ129 |
Unilateral Turning Depth (mm) | 1~2.5 | |
Diameter Tolerance | ≤IT9 (standard tolerance grade) | |
Surface Roughness(Ra) | ≤12.5μm | |
Curvature(mm/m) | ≤1.5 | |
Roundness(mm) | ≤0.03 | |
Feeding Cutting Speed(m/min) | 0.8-1.5 (for continuous chips and high strength and hardness should reduce the cutting speed) | |
Cutter Head Rotational Speed(rpm) | 240-670 (Six poles) 360-1000 (Four poles) | |
Main Machine Motor Power(KW) | 110 | |
Auxiliary Machine Motor Power(KW) | 11(feeding part) | |
Main Machine Outline Dimensions (Length*Width*Height) m | 5.3 X 3.5 X 3 | |
Full Set Machine Outline Dimensions (Including auxiliary) (Length*Width*Height) m | 18M X 3.5M X 3M | |
Main Machine Weight | 20.5 (29) | |
Total Installed Capacity(KW) | 130 | |
Compressed Air Source (users prepare by themselves) | 0.5~0.8MPa,1.8m3/min,more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier |
Company Information
Yantai Haige machine tools Co.,Ltd whose area is more than 2000m². There are one
hundred and forty staffs working in the factory. The factory is mainly engaged in
producing and selling peeling machine(centerless lathes), straightening machines, polishing machines(abrasive belt machines), auxiliary machines and other processing and finishing
equipment foe steel(bright steel) for more than ten years.
So far, the company has produced and sold more than 1500 sets of equipments.
The machines are mainly used to process the surface of the steel, copper,
titanium, magnesium, aluminum and other metal round bars, pipes and
wire from Φ5mm~Φ500mm. The peeling machine, straightening machine and
polishing machine can be combined into automatic production lines for processing
and finishing of the bright steel which remove cracks, oxide layer, decarburized
layer and other defects from the bar surface quickly. High quality bright bars,
pipes and wire can be produced with high precision and high surface roughness
whose working efficiency is several even more than ten times higher than that
of the traditional technique.Our company is capable of supplying automatic
production line in full sets by expanding varieties of the niche mechanical
equipments.
Process Materials
1.ferrous material:stainless steel,bearing steel,spring steel,tool steel,structural steel,
free cutting steel,valve steel,pinion/gear steel.etc
2.nonferrous metal:copper alloy,titanium alloy,magnesium alloy,titanium alloy,
magnesium alloy,aluminum alloy.etc
After-sale service
1.Free quality guarantee period for 12 months
2.Free provide long-term technical support
3.Free train buyer's operator in seller's factory
4.Fast responce service within 24 hours
5.Our engineers can offer overseas service,including guiding
installation,commissioning,training,etc.
Inside taking multi protection measures:
The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.
Second layer
inside of plywood box, adopting small square plywood block and strapping belt to fix.
Third layer
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
Fourth layer
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.
Outside wooden case with export fumigation
Other products
Bar Straightening Machine & Abrasive belt sander polishing machine
Contact
Contact Us
- Yantai Haige Machine Tools Co., Ltd.
- Contact nameJingping Ren
- Phone86-535-6726618
- Address1#,Jing 7 Rd, High-Tech Zone Yantai,Shandong
- DIODE SS34 JINGDAO package SMB instead 1N5822 DI SCHOTTKY 40V 3A SMD
- ST audio amplifier TDA7851L package ZIP-25
- STM32F103C8T6 MCU Development Board BLUE PILL STM32F103C8
- UMW L7812CV TO-220 Linear Regulator IC VOLTAGE REGULATOR 7812
- Varistor CU4032K300G2 SMD EPCOS Original and Genuine
- UTC Operational Amplifier TL072G-D08-T package DIP-8 instead ST TL072CN
- XINGLIGHT XL-302UBC LED 3MM White with blue light short pin WL 460-470NM IV 4000-5000MCD VF 2.8-3.4V
- YJ MS-015 Microswitch instead KW11-3Z-5-3T CHAVE MICRO SWITCH
- ZMM3V9 SEMTECH DIODE ZMM3V9PF ZENER 3V9 MINI MELF SMD PACKAGE LL-34
- 4609X-101-472LF BOURNS package SIP-9 REDE 8 RES 4K7 2% 9SIP PTH
- 4609X-101-473LF BOURNS package SIP-9 REDE 8 RES 47K 2% 9SIP PTH
- 4610X-101-473LF BOURNS package SIP-10 REDE 9 RES 47K 2% 10SIP PTH
- 8205A UMW package SOT23-6 instead FUXIMSEMI FS8205A CI DUAL N-CHANNEL MOSFET CJL8205A SOT23-6 SMD
- DW01 FORTUNE package SOT23-6 instead DW01A CI BAT LI-ION PROTECTION DW01A SOT23-6 SMD
- G6RN-1-DC24 OMRON package DIP-5 RELE 24V 8A SPDT PTH
- LED 0805 green 2V 570NM XINGLIGHT instead OSRAM LG R971-KN-1 LED OSRAM VERDE DIFUSO 0805 M2012 SMD
- LED 0805 red 2V 620NM XINGLIGHT instead OSRAM LS R976-NR-1 LED OSRAM VERMELHO DIFUSO 0805 M2012 SMD
- MAX690AESA+ MAXIM package SOP-8 CI SUPERVISOR MAX690AESA+ SOIC8 SMD
- SN74HC14DR TI package SOP-14 instead SN74HC14DRG3 CI INV 6CH 1-IN 14SOIC SMD
- SN74HC273DWR TI package SOP-20 CI FLIP-FLOP TIPO D 74HC273 SOIC-20 PTH
- TAJE226K035RNJ AVX Tantalum electrolytic capacitor CAP TANT 22UF 10% 35V CASE E SMD
- TP4056 UMW package SOP-8 instean NANJING TOP POWER ASIC TP4056 CI CHARGER BAT Li-Ion ARTICLE 1A PROTECTION - TP4056 - SOP-8 SMD
- USB4105-GF-A-060 GCT package Connector instead USB4105-GF-A CN USB TYPE C RECEPTACLE 2.0 SMD
- 40123242 cpu board for Juki JX350 RS-1 RS-1R
Popular Searches
Recommended Products
- 1325 4x8ft 3 axis kitchen cabinet door making machine cnc router foam woodworking carving atc aluminum mdf cnc router
- Heavy Duty 3 Axis CNC Router Machine Woodworking 1325 2040 3D Acrylic MDF Wood Carving advertising CNC Router Machines
- 1325 1530 4*8 ft 5*10 ft auto tool change wood carving machine cnc router woodworking advertising cnc engraving machinery
- cnc router engraver 1325 1530 high speed slow noise cnc router full 4 axis diy cnc for router aluminum
- Best Selling 4x8 Ft Cnc Nesting Machines Woodworking 1325 Wood Cutting Carving CNC Router
- Woodworking Cabinet 1325 1530 Multi Process CNC Nesting Machine Atc Wood Router
- cabinet door making machines atc cnc router wood cutting machine woodworking wooden furniture
- DIODE SS34 JINGDAO package SMB instead 1N5822 DI SCHOTTKY 40V 3A SMD
- Automatic wood nesting cnc router 2030 furniture making machine cabinet making machine with drilling
- hot sale 3 axis cnc router wood cutting machine 9kw auto tool change Customized cnc atc wood router machine for furniture
- Best Price Large Size 1325 1530 2030 2040 4 axis 3d atc Cnc Router Wood Acrylic Woodworking Engraving Machine for Furniture
- 3d wood carving 1335 4 axis cnc router woodworking machine with air cooling spindle for furniture for sale in Peru
Find Similar Products By Category
- Machinery > Other Machinery & Industry Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jingping Ren
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-