Convenient and Easy to use japan tool manufacturer FLASH DB with multiple functions made in Japan

Convenient and Easy to use japan tool manufacturer FLASH DB with multiple functions made in Japan

-Ideal tool in die-cast aluminum and iron-based or hard material of the molded Burr.  

-If it was cut and copying at high speed rotation as flash Repeat.

-Ideal tool to shape different resin product.

The picture is of the basic set, consisting of the FLASH DB main unit (A030) and

the FLASH BAR (FA-3).
1.  Without the need for material selection, only the burr can be removed by tracing.
2. Deburring is completed in 1/10th of the time usually required for filing.
3. End surface this is not too sharpener to the work become a guide so flat.

4. If the cutting tool is worn, it can simply be replaced with only the cutting tool.
5. The brush contains no abrasives, so the finished surface is remarkably clean.

Test results

The result of measuring the removal of burrs appearing when made a groove of width 8mm depth 3mm deliberately to the aluminum alloy A7075 at Keyence VHX-600.

Tool used was FLASH DB (A030 + FLASH BARFA-1)
typeA

typeB

 It is the result of the removal of burrs that appeared when you made the groove width 8mm depth 3mm to intentionally aluminum alloy A7075 was measured by JEOL Ltd. FESEM JSM6500F.

English subtitles use of FLASH DB

 URL https://youtu.be/9pMEIKKfErY

About BARUZO

1. Die-cast parting line burrs and inner diameter burrs can be removed without damaging the work.

2. Deburring is completed in 1/5th of the time usually required for filing. 
3. The drive unit is vibrating (back and forth), rather than rotating,

    meaning the operator can use it safely.
4. When the brush wears down you can simply replace the brush part.
5. The brush contains no abrasives, so the finished surface is remarkably clean.

About Twister DB
1. Because it moves back and forth a distance of 10mm each vibration,

    it is effective at removing deep burrs.
2. Effective for "Cross burrs" produced when making vertical holes.

Company name: HONMA SHOKAI CO., LTD.
Established: 1970
Type of business: Abrasives sales (grindstones, coated abrasives, abrasive belts,

abrasives (buffing materials, compounds, diamond pastes, etc.)),

development and sales of deburring tools.

A photo of the Japanese patent for deburring tools (BARUZO).