High Quality Reverse Water-proof LED Parking Sensor with E-mark certifciate

Specifications

Digital readout in LED indicates distance & orientation of obstacle
Integrated beeper for immediate alert
Water-proof test

High Quality Reverse Water-proof  LED Parking Sensor with E-mark certifciate

· Automatic activation when powered and reverse gear is selected

· Digital readout in LED indicates distance & orientation of obstacle

· LED display mounting on rear roof of vehicle & reflecting on rearview mirror

· Integrated beeper for immediate alert

· 3 stages warning by different beeping frequency and 3 colors LED

· Power supply:  DC10.5V-15V(12V normal)

 

 

 

1. Technical data

 

Supply voltage	10.5V ~15V (12V nominal)
Current consumption	200 mA max
Working temperature	-30°C ~ 70°C
Storage temperature	-35°C ~ 75°C
Obstacle detection	From 150 cm from the bumper (post dia. 80 mm)
Reliability over time	Satisfies the strictest automotive standards

 

 

2. Sensor

 

 

 

 

3. Signal

 

Obstacle distance	Distance category	Beep	LCD
150 ~ 110 cm	Safety	BI.....BI......BI........	1.5m ~1.1m
100 ~ 60 cm	Caution	BI...BI...BI.....BI...BI...BI....	1.0m ~0.6m
50 ~ 30 cm	Hazard	BI.BI.BI.BI.BI.BI.BI….	0.5m ~0.3m
Less than 30 cm	Hazard	BI.BI.BI.BI.BI.BI.BI….	P_

 

 

4. Installation check

 

In order to perform the check your vehicle must be in a flat, smooth area free

of obstacles within a radius of 3 meters from the rear and sides of the vehicle.

With the hand brake on and the engine switched off, put the car into reverse

gear and turn the ignition key to “ON”, so that the reverse light switched on.

 

5. Pack contains:

 

1 * command module                4 * ultrasonic sensors            1 * acoustic indicator

1 * power supply cable            1 * hole borer                        1 * accessory kit 

1 * instruction manual