Four Axis 3.5A Stepper Motor Driver 4 axis TB6560 Stepper Motor controller

Features of TB6560 Driver:

• Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !
• 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
• Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
  *Attention: This driver is the 1.5A-3A version, it's specially designed for stepper motors with rated current from 1.5A to 3A, it's NOT compatible with stepper motors with rated current below 1.5A or above 3A!
  If the rated current your stepper motors is below 1.5A, you can choose the 0.5A-2.5A version!
  Please let us know which version (1.5A-3A version is default) you need immediately after placing a bid!
• Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !
• On board current switching - Power output can be set according to specific user requirement !
• Full closed-type optical isolation to protect the user's computer and equipment
• Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
• 4 channel inputs interface- Can be used for XYZ limit and emergency stop !
• Professional design - Two stage signal processing with super anti-jamming !
• Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !
• Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !

Universal architecture - Supports most parallel software MACH3,KCAM4 etc!

• Dip settings  of TB6560 Driver:

Further Details of TB6560 Driver:

Power supply DC 12-36V(not included, please feel free to contact us if you need !)
*This driver get its power from the same unit as the steppers, it doesn't require a separate power source.
*Voltage Selection:
12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
24-36V DC power supply for Nema 34 stepper motors
(High voltage will burn up the chips or stepper motors!!!)
*Ampertage Selection:
Output current of the power supply can be calculated by the following expressions:
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good.

• The power output of 12V shall be applied to the radiator fan of 12V
• Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
• Suitable for unipolar or bipolar stepper motors.
• Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.
• 
  

  We provide standard packing for stepper motor, however, customized packing or OEM is also acceptable. 

We deliver our goods by sea, air and courier service.

 You may contact us to check the shipping status of your order

Shipping time, after confirmed the details, usually one week is enough for us to make stepper motor sample. Bulk order delivery time depends on the quantity that you need.

Company Profile :

Changzhou Dewo International Trade Co., Ltd., exporting stepper motors, motor drivers, BLDC motor and PM motor. We spcialize in this field for many years, with the strength of high quality and competitive price in China.

We have our own techinical department and we developed various models of stepper motor, we also have complete drawings for our motors. 

We can provide complete technical proposal for your project.

Any question about stepper motor, please contact me online or send me mail. We will reply you within 2 days!

AFTER SALE-SERVICE:

Terrific after-sales service: 24hours around the clock & 12 months Warranty

Life-long maintenance service for the product

Question 1: How to choose the suitable stepper motor?

Answer: There are several important items: size, length of stepper motor, holding torque, voltage, current etc. After confirm some them and told us, we can send you the suitable one.

Question 2: Any other methods to finalize the model?
Answer: Sure, you can send us the model you are using, we can help you find the suitable one.

Question 3: When can I get the drawing of stepper motor?
Answer: We will provide drawings of stepper motor after you place the order.