Incline Roof Type Flat Panel Split Solar Water Heater

Incline roof type flat panel solar water heater

Control system is the heart of parted solar water heater.

Main technical
function:
1. Full auto-control water function.
2. Constant temperature, timing electric heater(Power 1.5-4.5KW)
3. Setting temperature(30centigrade-90 centigrade),setting water level
(50%-100%)
4. Manual water, supply water of control temperature, auto-water after 15
minutes without water auto-stop after full.
5. Prevent frostbite circulation (Forcing circulation when water temperature
of the heat collectorbelow 2 centigrade)
6. Manual circulation ( the time of circumfluence could been set 5-99 sec.)
Once open, hot water coming.
7. Supply hot water by manual pressure, manual close pressure or auto-close
pressure function after 30 minutes.
8. Avoiding without water heater function (supply water level to 50% firstly ,
then auto-startup electric heater when
water level below 50%)

STANDARD SPECIFICATION:
1.Type of tank: Pressurized, vertical or horizontal, working pressure
up to 650Kpa (6.5bar).
2.The inner tank: ,food-class SUS 304-2B thickness1.2 mm
3.The outer cover: colored steel, thickness 0.5-mm
4.The insulating layer: 57mm high-density polyurethane,72 hours
heat preservation
5. Tank include :1.5/2.0/2.5KW Electric Heating Element , Mg Anode , T&P
Valve, Sensor,non-return valve

Features
Special-protection inner tank with the quality 5 years guarantee
1. High intensity fixing and locking device;With the function of typhoon resistant;
2. 2. Copper plated with blue TiNOx , absorbing film;high performance
3. High tech super sonic welding process, low temperature welding makes no
defects;
4. Long service span select high quality toughened glass, high light piercingratio, and impact resisting;
5. Simple integral design; Convenient connection of circulation port; Reliable
sealing.