split solar water heater(heat pipe collector)

split solar water heater(heat pipe collector)

Working principle

1. The solar collector absorbs solar energy and transmits it to the pressurized solar water heater tank through circulation;

2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically;

3. The circulation pump makes heat-conducting liquid circulate automatically;

4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank;

5. When the temperature difference between solar collector and heat pipe solar water heaters tank doesn't reach the set value, the circulation pump will be shut automatically;

6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically;

Features

 1)High Efficient:

Advanced heat transferring style of heat pipes,excellent Selective absorption coating,perfectly combined with high vacuum heat preservation;

2)Convenient Installation:

Solar collectors are separated from storage tanks. The tank can be put at any place in house. And the collector can be put on inclined roof or flat place;

3) Module Design, Intelligent Control and Automatic Operation;

4) Anti-Freeze:No water inside the tubes when it works,so no freeze;

5) All Weather Hot Water Supply:Equiped with auxiliary electrical heating device,supplying enough hot water during bad weather days;

6) Multifunction: Bathing, washing, domestic heating etc;

7) Energy Saving and Environment Friendly:Taking advantage of solar energy, free of charge, and no pollution;

8) Stable and Reliable Performance, Well Wind Resistance;

 Pump Station Component

1. Operating screen 2. Manometer 3. Pump speed adjust switches 4. Temperature difference circulation pump 5. Flow rate indicator 6. Return circuit connector 7. Safety valve 8. Expansion vessel connector9. Return circuit connector 10. Wall mounting 11. Expansion vessel: 8L 12. Pressure resistance: 10 bar pressure for expansion vessel

Specification

1) Inner tank: stainless steel thickness 1.50-2.0MM

2) outer tank: stainless steel thickness 0.35MM.

3) manifold (interior): red copper.

4) manifold (exterior): aluminum alloy.

5) Glass tube dimensions: 58mm x 1.8m.

6) Heat preservation: 72 hrs.

7) Hail resistance: 25mm.

8) max pressure: 0.6Mpa.

9) Coating of vacuum tube: SS-C/CU.

Contact person: eva he

Tel: 0086-13511390503

Fax: 0086-0573-87869935

Skype: eva201423