Mobile Bicycle advertising Trailer For Hot Sale

Power and Charging Specifications

• Batteries: (6) 6 volt 225 amp batteries
• Battery Charger: 110 Volt, 1000 watt, 60amp
• Recharge: 24 hours
• Onboard diagnostics to monitor: Solar, battery, and load
• Solar: (2) 110 watt Solar panels
• Regulator: 30 amp regulator with low voltage & high voltage disconnect.

Controller Specifications

• Preprogrammed Messages: 260 also includes arrow and MUTCD symbols
• User programmable: 100
• Message Timing: Slow, medium, fast
• Dimming: Auto or Manual
• Protection: Password
• Quick Message Selection: Thumbwheel to quickly select between 16 user programmable messages.
• Controller Display: LCD
• Data Entry: Mini Keyboard

Features

• Graphic Capability
• Compact Trailer Design
• Quick Message Selection
• Removable Tongue
• Lockable Cabinets
• Password Protection
• Powder Coat Paint
• Tongue Jack (with wheel)
• NTCIP Controller Standard
• Independent Module Operation
• Photocell for Auto dimming
• RF Immunity

Trailer Specifications

• Width: 79"
• Length with tongue: 174"
• Length without tongue: 128"
• Transport Height: 129"
• Salt Spray: 1,000 hours
• Paint: Powder Coat
• Main frame: 3"x5"x1/8"
• Front/Rear Cross members: 3"x3"x1/8"
• Wheels: 15"
• Axle: 3500lbs leaf spring
• Fenders: 16 gauge bolt on
• Jacks: (4) adjustable corner jacks & tongue jack with wheel
• Hitch: 2" ball

Display Module Specifications

• Pixel Matrix: 27x48 Pixel Arrangement
• LED Module: Each is 6x9 matrix
• LEDs Per Pixel: 4
• LED Type: Agilent amber 592NM
• Viewing Angle: 30 degrees
• Visibility: 4800 feet
• Hours: 100,000 hour LED
• Lines: Displays 3 lines of text and also displays Graphics
• Characters per line: 8 (12 characters optional)
• Character Height: 18"
* If one module fails the remainder of board is unaffected.

Display Enclosure Specifications

• Construction: Extruded Aluminum 6063 alloy
• Length: 142"
• Width: 81"
• Depth: 6"
• Paint: Powder coat paint
• Salt Spray: 1000 hours
• UV Resistant: 500 hours
• Seal: Weather resistant
• Venting: Vented top and bottom
• Front face: 1/8" Lexan UV matte finish
• Raising and lowering of display: Electro-hydraulic
• Secondary raise and lowering: Manual hand pump

Modular

 The simplest matrix-type signs are those that are comprised of character blocks. A sign would have, for example, three lines with eight character blocks per line.

Continuous Line Matrix

A somewhat more flexible type of PCMS uses a continuous matrix for each line of text. These signs offer the ability to use proportionally spaced fonts, as opposed to the monospaced text displayed by discrete character blocks. The benefits include a more natural-looking sign and, therefore, an easier-to-read message.

Full Matrix

The full-matrix PCMS is the most flexible type. The entire sign face is comprised of elements or pixels that can be activated to display a message. These signs offer the ability to vary the height of characters, display simple graphics, and use proportionally spaced fonts.

Depending on the matrix type, the height of a character can vary from 457 to 1372 millimeters (mm) (18 to 54 inches). Most PCMS units allow only eight characters on a line, no matter what the character height. Each character shall, as a minimum, be five pixels wide by seven pixels high.