Q26 sand blasting nozzle/blast chamber cleaning room

 The mechanic recovery blasting room adopts mechanic recovery system to recovery abrasives,and the abrasives can be chosen according to requirements.

The abrasive usage is high and process productivity is also high.

The dust removing system adopts two stages dust removing, and the dust removing efficiency can reaches 99.99%.

The air flow in ventilation in this kind of blasting room can be adjustable to prevent the abrasives from entering cartridge filters.

Thus it can reduce the lost of abrasives and can have a good dust removing efficiency.

The main electrical elements in this blasting room uses Japan/EU/USA brand. They have the advantages of reliability, safety, long life service and easy maintenance.

Use widely: It applies to middle and small size of blasting room to do pretreatment jobs such as rough, casting, welding, heating, steel structure, container, transformer shell, special parts and so on.

1. Open dust collector

2. Open separator

3. Open elevator

4. Open belt conveyor

5. Open light

6. Load workpieces in trolley

7. After trolley arrives at fixed position, close blasting booth door

8. Operators do shot peening, surface cleaning starts

9. After cleaning is finished, open blasting booth door

10. Trolley leave blasting booth, turn over workpieces, repeat step 7, 8, 9 

11. Trolley returned to unloading station, unload workpieces.

12. Repeat 6, 7,8,9,10,11 steps

13. If you prepare to stop work, turn to step 14 

3D DRAWING