E14 7006-3-15 Lamps Gauge For Testing Contact-making In Lampholders

each in a black box

E14 7006-3-15 Lamps Gauge For Testing Contact-making In Lampholders

According to the requirement of IEC60061, Chuangxin produce different high accuracy and high quality "Go" and "Not go" gauge.

Purpose: 

To check E14 lampholders in respect of: A) contact-making with lamps having 

adverse dimesions. 
B) protection against accidental contact with live parts, viz, the cap shell, during insertion of a lamp. 

Testing: 

The holder is connected in the test circuit as shown.

 A) with switch A in position 2 and switch B open, the gauge is screwed fully home. In the position, both lamps shall light. 

B) with switch A in postion 1 and switch B closed, the gauge is screwed in slowly until either of the lamps lights. With the gauge held in this position, switch B is opened and the test probe at the side of the gauge is slid downwards as far as it will go into the space between the gauge and the holder. In this position the lamps shall not light. 

CX-E14 is for E14 lamp cap standard source measurement. It includes 7006-27F-1, 7006-28B-1, 7006-54-2, 7006-27G-1, 7006-55-2.

CX-E14H is for E14 lamp holder standard source measurement. It includes 7006-25-7, 7006-26-4, 7006-30-2, 7006-30A-1, 7006-31-4

 Other gauges:

Our product range: IEC & UL Test Probe,Mechanical Impact Tester,  IEC Test Instruments,
Lamp Cap & Holder Gauge & Test Instrument,Temperature Rise Test Instrument,Electric Safety Tester,Environmental Test Instrument,Plug & Socket Gauge,EMC & LED Test Instrument,ETC

Welcome to your kindly enquiries!

Skype:Bellacxyq