WIFI OBD2 Auto Diagnostic Cable OBDII OBD-II Code Reader WI-FI OBD AUTO CHECKER Interface

Specifications

WIFI OBD2 Auto Diagnostic Cable
1.Newly Wifi OBD2 Diagnostic Tool
2.Newest Version
3.for Apple iPad iPhone iPod Touch

IP: 192.168.0.10

Subnet: 255.255.255.0

Port: 35000

Range: 50 ft (Line of sight)

Antenna: Internal

Power Consumption: 0.75 Watts (With Power Switch)

Wifi Standard: 802.11a/b/g

Operating Temperature: -15 to 100 Deg Celsius

Plastic: Automotive Grade Physical Dimensions: 2.75 x 1.25 x 1.2 inches

 

Description

ISO 9141

ISO 11898(aka. CAN)

ISO 14230(aka. KWP2000)

ISO 15765(aka. CAN)

SAE J1939

 

 

WI-FI OBD AUTO CHECKER is able to detect and interpret these protocols automatically. It
also provides support for high speed communications and a low power sleep mode.
It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod
touch, iPad and so on). There are plenty of software packages available, which
are fully compatible with WI-FI OBD AUTO CHECKER. Some of them have
pretty useful features, such as engine running parameters monitoring, DTC
reading and clearing, MPG meter, etc. You can even write your own software on a
specified hardware platform if you wish, because the AT commands are fully
documented and very well explained. WI-FI OBD AUTO CHECKER is measuring
only 2.7 x 1.25x 0.9 inches, and it comes attached with a 6 ft OBDII cable for
easy installation. It also comes included with a power switch built-in to
prevent the need for having to constantly disconnect your unit from the OBDII
port. It is compatible with 1996 and later vehicles. Connecting to your
iPhone / iPod touch /iPad is made by WIFI connection in adHoc mode.

Elder OBD compatible vehicles has a sticker indicates that the
vehicle is OBD compatible. Model year 1996 and newer vehicles are compliant by
default, and will not have this sticker.

 

Following are some of the parameters which could be read from the vehicle.

Vehicle Speed

RPM

Fuel Consumption*

Engine Coolant Temp

Fuel Pressure

Calculated Engine Load

Throttle Position

Intake Manifold Pressure

Air Intake Temp

Timing Advance

Mass Air Flow

Fuel Level

Barometric Pressure

EVAP System Vapor Pressure

Fuel Trim

Note: Your vehicle may not support all above parameters. How many parameters

you can get is depended on the vehicle manufacturer’s implementation.

 

 

Vehicles supported

Our device works on all 1996 to 2010 cars and light trucks sold in
the United States, including:

Compatible Software and Features:
What features you can have depended on what software you install on iPhone /iPod
touch /iPad/ PC. There are a lot of commercial or free software. The features of
the software differ from one another. User should choose his own software by his
preference. For more details about the software, please consult the software vendors.

 

 FAQ:

Q:Will This Code Reader Work with My Car?

A:1.This OBD II Code Reader is specially designed to work with all OBD II compliant vehicles. It is required by EPA that All 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all Domestic, Asian and European vehicles.
2.A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate OBD II Certified. Additionally, Government regulations mandate that all OBD II compliant vehicles must have a common 16pin Data Link Connector (DLC).
3.For your vehicle to be OBD II compliant, it must have a 16 pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. This label is located on the inside of the hood on most vehicles.

Q:My Apple device finds and connects to this product, but nothing is working?

A:After you connect with WiFi, set a static IP on your Apple device with: IP 192.168.0.11 or 192.168.0.10 and subnet mask: 255.255.255.0.

 

 

 

After sale service:
1) One Year product quality warranty
2) Free repair and maintenance service in one year 

3) Free technical support by internet or via phone