Rotary mechanical guide bar screen , grid machine with nylon rake

 Mechanical Bar Screen is an automated self-cleaning bar screen primarily used for headworks screening of the influent wastewater before entering the treatment plant. It has also been used in freshwater applications to screen the water before entering potable water plants.

The supporting structure of the screen is fabricated of non-corrosive 304 stainless steel while the screening belt is formed of an aircraft grade polyamide/fiberglass composite to ensure a long life and peak performance. The screenings brush situated in the head of the screen is made up of durable polyamide fibers to sweep the belt clean. The sprockets and belt guides attached to the drive unit and screening belt are a polyamide nylon that never needs lubrication.

Our Mechanical Bar Screen is installed into a concrete channel and each is custom built for your application. For most applications, screening belt openings of 1, 3, 6, and 12 mm are available. However, custom openings can be accommodated.

Each screen is factory tested and inspected to ensure that you will receive a high-quality product that will do the job. Critical inspection points include a detailed visual inspection on all welds and material craftsmanship. During the mechanical and operational testing of the screen, the control panel is tested as well as the overload feature. The overload feature is tested by applying a weight (determined by screen size) to the belt. The overload feature is activated when the threshold weight is breached and a sonic and visual alert is activated.

                   

YMGS Mechanical Bar Screen has the below advantages:

• 304 stainless steel and aircraft grade materials for durability
• Automated operation for less operator attention
• Automatic cleaning and backwash to allow your operator to focus on more important tasks
• Custom built to your specification for ease of installation
• Simple control panel for maximum operability

The Mechanical Bar Screen is composed of driven device,rake tooth facility,flush facility,which is assembled by a special rake tooth into a group of rotary grille chain.

Under the drive of motor reducer,the rake tooth chain turn Rotary motion as reverse flow.When it get the top,the guiding power of the geneva wheel and curve will make every rake tooth to do the relative self-cleaning motion,then due to the gravity,most of the solid will drop down. The sundries sticking in the rake tooth will be cleaned up by sweeper's reverse movement.

• The depth of Ditch will be customized as the buyer's requirement.
• Diversion trench Length(mm)=1500+Hxctga
• Medium maxi temperature(°C)=less than 80 degree
• foot margin to discharging top mouth height H(mm)=400~1000m

The mechanial bar screen need the below Accessories

The whole processing is as below:

To protect the equipment in good condition,the paper carton and plastic film will be wrapped outside,as the below picture shows:

Our production has ISO9001:2000 & CE certifications.

Qingdao Yimei Environment Project Ltd. is found in 1988.We are located in the largest port city-Qingdao China. Our factary take up 36,000 square metres and there are more than 130 kinds machine for manufacturing. As a member of Shandong Province Environmental Protection Industrial Association, we have 360 staff and  72 experienced engineers.

Our main product is the equipment for Environment Protection and Waste Water Treatment.And the product is popular all over the world,such as Africa, North America,Domestic Market,Eastern Asia,Mid East.