Touch button Remote Control Socket

Specifications

first touch button RF remote,
more attrative design,
dimmable with memory.
above 20M control distance.
wireless RF control

1, Remote Control

• Frequency 433MHz.
• 4 touch buttons, each button equal to one channel
• Touch buttons         Short touch - ON/OFF  (below 1.0 second)
• Long touch – DIMMER (from min. to max. – from max. to min.)  (above 1.0 second)
• Memory of the last light level after the switching off.
• LED ON when working
• LED blinking when EMPTY BATTERY  (below 2.7V)
• Battery - CR 2032

2, Plug + Socket

• Frequency 433 MHz.
• 4 pre-set channels, the channel can be selected by the switch on the receiver board.
• Power Max. 300W ,10A./16A.
• LED ON when working
• Input plug is soldered on the sample, the output are two wires (blue, grown), pls connect these two wires onto the load ( can be lamp, motor etc.). Pls connect the load firstly, then put the plug power on.