Rebar Bending Testing Machine for process plane rebend test of steel bar

Specifications

1.bend testing machine
2.Diameter of steel bar:aa6-aa40mm
3.to process plane rebend test of steel bar
4.1.5kW motor power

Rebar Bending Testing Machine for process plane rebend test of steel bar

 

1. Introduction:

 

The testing machine is mainly used to process plane rebend test of steel bar, It’s main technical specification meets test standard YB/T5126-2003 Steel Bar for Reinforcement of Concrete-Bend and Bebend Tests and GB 1499.2-2007 Steel for Reinforcement of Concrete Part2: Hot Rolled Ribbed Bar. It applied to rebend test of deformed steel bar for steel factory, construction units and onsite bend test of steel bar for construction trade.

 

2. Main Technical Parameters:

 

Item	Parameters
Diameter of steel bar	Φ6—Φ40mm
Positive bending angle	Within 0°—180°, arbitrary setting
Reverse bending angle	Within 0°—25°, arbitrary setting,
Rotary speed of working plate	≤3.7r/min
Roll center space(mm)	165mm
Diameter of working plate(mm)	Φ580mm
Motor power	1.5kW
Standard configuration of flexural center sleeve	One set
Overall dimension (LxWxH) (mm)	1050×740×1170
Weight(kg)	App.700kg

 

3. Function and Features:

 

The testing machine can serve as two testing machine by change the accessory specification. It is with lots of characters: multi-function and compact structure, easy to operate, audio-visual reading value, stable running, low noise, long lifetime, reasonable design, easy maintenance, simple lubrication, smart design of limit and wearing parts.