70 Series Pipe Compression Fittings

Installation d.20-63mm  Pipe Compression Fittings
	1. Cut the pipe square at 90° to the length using a pipe outter.
	2. Insert on the pipe in the following order collar and clinching and place the O-ring on the mouth of the pipe.(fig 2 & 3)
	3. Insert the body of the joint until the gasket is struck in the body itsel.(fig 4)
	4. Insert the body of the joint the gasket has slid inside the body.
	5. Fully tighten the nut. The nut can be tightened manually up to d.32mm, but for larger diameter it is advisable to use a wrench.
Installation d.75-90mm  Pipe Compression Fittings
	1. Cut the pipe square at 90° to the length using a pipe cutter. Lubricate the pipe and the gasket so that the fittings sit correctly on the pipe. Insert the fittings onto the pipe in the following order: ring nut, clinching ring, thrust bushing and put the gasket on the mouth of the pipe.
	2. Push the body of the fitting on the pipe until the gasket is pushed inside the body. (fig.2)
	3.Push the body of the fitting on the pipe until the gasket is struck in the body itself (fig.2)
Installation d.110mm Pipe Compression Fittings
	1. Cut the pipe square at 90° to the length using a pipe cutter. Lubricate the pipe and the gasket so that the fittings sit correctly on the pipe. Insert the fittings onto the pipe in the following order: ring nut, clinching ring, thrust bushing, gasket and body of the fitting.
	2. Fully tighten the nut until the gasket is stuck inside the body.
	3. Untighten the nut, open the clenching ring and insert it on the pipe, fully tighten the nut using a belt or chain wrench.

1. Have cooperated with a lot of importers in the world for more than 8 years.

2. Experienced in handling OEM orders.

3. Quick delivery time for decent orders.

4. Own designing team for decent orders.

5. Free samples could be provided.

Yuhuan Shinehone Plastic Industrial Factory is a manufacturer of high pressure pipe works. Our industrial pipe fittings have various applications and are currently being used in many industries around the world.

Founded in 1997, Shinehone has and continues to develop advanced techniques in the production of cost effective thermoplastic pressure pipe fittings and valves. We also offer a wide range of plumbing compression fittings for drip irrigation, impact sprinklers and swing joints. Additionally, we manufacture filters used for a wide range of irrigation systems related applications. Our products are safe and friendly to the environment and our production processes are socially responsible.

We welcome and look forward to the opportunity to work with you on your pipes and fittings need.

  PP Compression Fittings 70 Series