Flotation Machine in Mineral Separation for Gold/ Copper/ Zinc /Chrome ore Beneficiation Plant

Flotation machine (also called Flotation separator) is applicable for the separation of nonferrous metal and ferrous metal and nonmetal, such as fluorite and talc. Flotation is a separation method based on the wettability of minerals,which separates the minerals by their difference of floatability. In modern flotation, the potions play a very important role. After the particular treatment of potions, the mineral floatability has been changed. So we can make the selected minerals float on the mineralized forth, paving the way for later separation.

1). The impeller is rotated by V-belt of motor and produces centrifugal effect with negative pressure;

2). Enough air is inhaled into mixed pulp, and pulp mixes with drug at the same time;

3). Mineral sticks on bubble completely and floats on the surface of pulp to form mineralized bubble;

4). Useful bubble is scraped out by adjusting flashboard height and controlling liquid surface.

1). Large inhaling capacity and low energy consumption;

2). Complete flotation circuit with inhaling air and pulp, no auxiliaries are needed;

3). Process is easy to be changed;

4). Reasonable circulation of pulp decreases coarse sand sedimentation;

5). Automatic controlling device makes adjustment more convenient.

1. It's used to separate nonferrous metal, ferrous metal, noble metal,nonmetallic mine, chemical material;
2. Flotation Machine can be used in roughing, scavenging, selection or reverse flotation;
3. Flotation machine is widely used for roughing, concentrating and counter lotation of nonferrous metal that includes copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic mineral;
4. In the flotation process, after being mixed with drug, some qualified mineral attaches on bubble, floats on the surface of slurry and is scraped out, and other mineral still stays in the slurry, and the separating purpose is finished.

(1)Improve quality grade up to 4-6%

(2)Improve the recovery rate up to 8%

(3)Improve yield up to 12%  

1). What’s the material you are going to deal with?

2). What’s the granularity of the material?

3). What’s the granularity of the final products are you going to achive?

4). What’s the producing capacity you are going to achieve?