Corrugated Cartn Box Two Colors Flexo Printing and Slotting Machine

Specifications

-Max. printing speed: 60 sheets/min.
-Economy printing speed: 50 sheets/min.
-Max. paper coverage area: 1450*2600mm.

(1) Max. printing speed: 60 sheets/min.

(2) Economy printing speed: 50 sheets/min.

(3) Max. paper coverage area: 1450×2600mm.

(4) Min. paper coverage area: 350(full block print) ×500mm.

(5) Effective print area: 1450×2400mm.

(6) Adapted paper board: three layers, five layers, seven layers (3mm-12mm).

(7) Chromatography precision: ≤±0.5mm.

 

Operation Instructions of Every Part of the Equipment and the Notes.

1. Paper-feeding part

chain feeding.

 

2. Printing part

(1) The drive part of printing part adopts big screw and bevel gear drive which increases strength of gears and driving stability under the circumstance of lowering noise. The material of all the drive gears adopt 45# steel, after high frequency hardening. The paper-feeding of the drive part of the printing part adopts cross sliding drive, which does not enlarge the space between the gear-top and gear-side, make the color process (esp. the multi-color process) more accurate. The gears of the machine adopt automatic insufflation circular lubricate.

(2) The machine adopts satellite gear structure for adjusting the clockwise and the anticlockwise phase of the printing roller and slotting knife roller.The clockwise and anticlockwise phase of the printing roller and the slotting plate roller adopts 360° electric adjusting while stop working or during working, and it also has function of “clear block memory” and “automatic back to the zero location”. Electrical adjustment inputs the data according to the error. The horizontal direction moving of the printing roller is adjusted by hand, and the adjusting distance is 10mm.

(3) Each part is electric moving left and right with warning bell. When unit moving, the bell will be warning to make sure the operator safe. The moving motor with constant torsional moment which can buffer the impact of the two units when the operation is wrong. After all the parts closed, each part is pneumatic locked.

(4) The ink distributing of the inking part adopts the rubber roller inking. The anilox roller usually adopts 180#---220#, also can be chose accord the customer use.

(5) Inking system adopts pneumatic diaphragm pump inking with the ink cup to prevent the ink splashing. Pneumatic diaphragm pump inking can also adjusts the volume of ink.

(6) Pneumatic control up and down of the anilox roller to prevent the print plate two times be inking and to prevent the ink from being dried out and coagulative while short time stopping the machine.

(7) When the machine stops, the anilox roller and rubber roller could running independently for transmission ink and prevent the ink drying out.

(8) There are early warning electric bell and rapid-stop button. In the production process, if there is an emergency, they can press early warning electric bell and rapid-stop button to stop the machine.

 

 3. Slotter Part

(1) Hand adjustment for the height of the carton. Four knives are synchronous.

(2) The knife plate and the creasing wheel move left and right is synchronous adjusted by hand.

(3) The phase adjusting is the same as the printing part.

 

 4. Die Cutter Part

(1) Gear high frequency heat treatment, the surface adds the hard correct grinding to make; Use hight quality die cutting cushion, the installment exchanges fast convenient, die cutting edge smooth , the service life is long, reduces the use cost enormously.

(2) The die cutting roller move left and right is synchronous adjusted by hand.

(3) The phase adjusting is the same as the printing part.