Home > Products > Car /truck batteries > quick start type car battery brand 12v 45ah mf 46b24l s car battery
quick start type car battery brand 12v 45ah mf 46b24l s car battery
- 24000 Set / Sets per Month
- Shenzhen
- T/T L/C D/P D/A Credit Card PayPal
- Passenger 3 wheels motorcycle batteries ,12V18Ah three wheel bike battery
- motorcycle batteries battery 12v 18ah
- best price lead acid motorcycle rechargeable battery 12v 18ah
- 12v 18ah motorcycle battery 12v lead acid motorcycle battery motorcycle battery parts
- 12v 18ah high performance dry charged motorcycle battery
- 12N18-3A 12V 18Ah motorcycle battery
Product Details
Place of Origin: | China | Brand Name: | EASTAR or OEM | Model Number: | 46b24l |
Usage: | Other, Car, starting | Voltage: | Other, 12v | Sealed Type: | Sealed |
Maintenance Type: | Free | Size: | 240*130*200*220mm, 240*130*200*220mm | Weight: | 12.4kgs, 12.4kgs |
Nominal Capacity: | 45AH |
Product Description
Product name: quick start type car battery brand 12v 45ah mf 46b24l s car battery
12V battery
1)CE, ISO9001
2)good start-up capability
3)low self-discharge
4)Excellent Starting Performance
Attention:
1) Do not handle battery roughly.
2) Do not drop water in the battery before electrolyte is filled.
3) See instructions before putting into service.
4) Sulphuric acid cause severe burn.
5) Keep away from spark.
6) Danger!Explosive
7) Wear goggle
Instruction for Putting Into Service
1) Fill cells with electrolyte(refined sulphuric acid) having a specific gravity as given in Table 1 to the proper level as given in Figure 1 When filling the electrolyte, temperature must not be lower than 15°C nor higher than 30°C. Note: if battery vent plugs are sealed with tapes, discard sealing tapes.
2) Allow battery to stand for some time after filling before placing on charge. If electrolyte level has drop, add more electrolyte until proper level is reached.
3) Place on charge at the proper rate as given in Table 13, charge until cell gases freely, and the voltage and specific gravity are constant over three times successive readings taken at 30 minutes intervals.
4) During the charge, do not allow electrolyte temperature to rise above the value as given in Table 1. Should this temperature be reached, reduce charging current. Electrolyte temperature is below -15°C, charge at a half of less of the proper current in the long time, or charge at normal charging current after keeping the battery in a warm room for about 24 hours.
5) Don’t fill a hole of vent plugs
6) Keep vent plugs tight
7) Consider that the battery should be kept warm and that charge states should be accurate in order to keep electrolyte free from freezing in the cold season.
8) Grounded terminals of the battery are desirable to be disconnected in a long standing period installing battery in vehicle.
9) The battery should not be attached to petroleum or contacted to vinyl chloride.
Table 1
SG of electrolyte required under full charged.(20°C) | Hot Climate 1.240 | Tropical Climate 1.260 | Cold Climate 1.280 |
SG of sulphuric acid for filling new Cells. (20°C) | 1.230-1.240 | 1.250-1.270 | 1.270-1.290 |
SG of electrolyte at end of charge (fully charged)(20°C) | 1.230-1.240 | 1.250-1.270 | 1.270-1.290 |
Maximum permissible temperature of electrolyte during charge | 50°C | 45°C | 45°C |
Table 1
SG of electrolyte at end of charge (fully charged). (20°C) | 1.240 | 1.260 | 1.280 |
Value of SG of electrolyte. (20°C) | Less than 1.190 | Less than 1.200 | Less than 1.220 |
General Notice
1)Battery should be secured firmly in the vehicle in a proper manner.
2)Charge battery fully as soon as it is over discharge.
3)An open flame or spark should not be brought too close to the battery.
4)If the temperature of electrolyte is extremely low, it is difficult to determine whether battery is fully charged and charging efficiency becomes poor. Therefore, when be sure marked POS cable is connected to POS (+) terminal. Connect NEG(-) cable last to prevent dangerous sparks. DO NOT OVER TIGHTEN! It’s a good idea to install special corrosion retarding fiber washers around terminals to help extend battery life.
5)Side terminal batteries need special care. Over tightening the terminal bolts will severely damage the battery and could cause a dangerous explosion. Use a special side terminal torque tool to avoid this hazard.
6)Coat the terminals and exposed metal parts around the battery with a good quality protective spray.
Table 3
Initial charge current AMP | 0.08XC |
Normal Charge current AMP | 0.1XC |
C: Battery Capacity (Amp) at 20 hour rate |
Contact Us
- Shenzhen Eastar Battery Co., Ltd.
- Contact namemarisa Shaw
- Phone86-755-22214426
- AddressRoom905, Hongchang Plaza, Shennan Road East, Luohu Shenzhen,Guangdong
- SILVERFIR SLD300-2 BATTERY 2V300Ah CCS AGM Batteries
- SILVERFIR BATTERY lead-acid battery/4EPZS240SC 240AH 24V
- SILVERFIR 5EPZS775 BATTERY 48V775Ah Forklift Batteries
- DEU SILVERFIR BATTERY 2VEG600 220V600Ah EPS
- Steco Battery STECO Batterien STECO Batteries
- STECO Batterien PLATINE12-200 12V200Ah
- SILVERFIR Batterien 2VEG400 DETA dryflex VEG
- SILVERFIR 2VEG300 DC2V300Ah DETA dryflex Batterien
- SILVERFIR BATTERY 2VEG600 DC220V SILVERFIR
- SILVERFIR 2VEG500 Batteries 2V500Ah Silverfir Battery
- SILVERFIR Batterien GmbH 2VEG400 SILVERFIR BATTERY
- SILVERFIR BATTERY 2VEG500 2VEG200 DETA dryflex
Popular Searches
Recommended Products
- FOXBORO FBMSVH Control card module
- FOXBORO FBMSVL Multi port serial card
- ABB XVC770BE102 3BHE021083R0102 Thermal dispersion technology flow meter
- ABB XVC770AE 3BHE006414R0001 Servo Driver
- ABB PFEA113-65 3BSE050092R65 Dual expansion port module
- ABB LTC391AE01 HIEE401782R0001 connecting module
- ABB DSAI 130A 3BSE018292R1 Digital input/output module
- GE SR489-P5-HI-A20-E Protection Relay
- VIBRO-METER VM600 RPS6U 200-582-500-013 Vibration monitoring and control system
- HONEYWELL SPS5710 51199929-100 Power supply module
- GE IS210BPPBH2CAA Digital expansion module
- GE IS200TSVCH2AED MRP246517 Digital I/O module
Find Similar Products By Category
- Electrical Equipment & Supplies > Batteries > Storage Batteries
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
marisa Shaw
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-