2-port electric auto shut off motor ball valve stianless steel for DN25 to DN125 water treatment system

2-port electric auto shut off  motor ball valve for DN25 to DN125  water treatment system, full port stainless steel ball valve

Actuator code:  CTF series
Voltage:DC12V,DC24V, AC220V,
Torque output: 25 NM- 100NM
Working Pressure: 0-1.6 Mpa(16bar)
Temperature:0 to 100 Degree Celsius
Size Scope: ball valve,15-65(mm); butterfly valve 40-125(mm)
Open/Close time: 10 -- 25sec
Number of wires: 2-5 wires
Protection class :  IP67

Series CTF actuators with its smart design, wonderful shape, are suitable for many kinds of vavles. It has proved its superior quality for its stable nature, and good quality. These actuators are return type and suitable to DC or AC (will be set in the factory), can be controlled by outside cut off.  This actuator run low cost and does not need to be maintained.

 DC or AC (should be set in the factory), control mode is flexible, convenient to microprocessor and realize the automatic control by PLC.
 Manual/electrically operated integrated design, Simply to operate.
 Large output torque, inner protecting overheated device, working stable and reliable.
 Low noise, good leak-proof. Through the coupling, the valve will be installed and operated    easily.