Insulated Foil Metallic Bubble Envelope

Product Name:Insulated Foil Metallic Bubble Envelope

Aluminum foil bag

Description

Protect your expensive electronics from moisture and static damage ;

In flat open top style, zipper lock, gusset style, stand up style are available. 

Printing or stamp is available;

Being opaque and light tight, it ensures the inside item can not been seen from  outside ;

Available in three –layer or four-layer structure;

Firm lamination and hot sealing offers superior resistance of vapor and oxygen ;

Surface e resistance of10(8—11)Ω,10(3-5) Ω or 10(4-6) Ω is available;

Applicable to pack electronic products which are sensitive to moisture and static, such as PC board, IC integrated circuit , CD driver , HD etc.

Dimensions

Sizes

72mmX65mm,   for 1-2grams

70mmX90mm,   for 2-4grams

85mmX105mm, for 4-6 grams 

85mmX110mm, for 6-8 grams

90mmX120mm, for 8-10 grams

95mmX140mm, for 10-12 grams

Feature

Glossy appearance, can be vacuumed

Moisture proof, oxygen barrier, anti-static

All sizes are available in open flat, ziplock

Available in different material to suit for different products’ package 

Customized structures, size, styles are welcome.

Original factory price, high quality, fast delivery

Strong hot sealing and firm lamination of different layers of material.

The three layers and four layers structure have excellent function of stopping water and oxygen.

Superior puncture resistance.

The surface resistance is 108-1010

The surface makes for excellent printability. The characters, image, and trademark according to the customers requirements under the condition that the others intellectual property is not impinged. It helps to promote the enterprise image.

Technology Data

Application

Electronic products packaging with moisture barrier requirement such as all kinds of PC board, IC integrated circuit, CD driver, HD, electronic component, etc.

 More Products We Are Manufacturing 

Metalized Foil Bag Colored Metallic Bag

Function Introduction

Characterizing in anti-static, light insulation, oxygen insulation, waterproof, moisture protection and UV protection, and with advantages of high tensile strength, good toughness, high-end packaging, etc. The surface resistance can be up to 108Ω to 1011Ω.

Material and Structure

The appearance is silver, glossy and non-transparent. The outer VMPET film is a kind of flexible packaging material generated by plating a layer of paper-thin metallic aluminum on the surface of plastic film with special process; the inner material is CPE or CPP that can be sealed by heat.

Applicable Scope

Applicable to the packaging of products with requirements of anti-static, moisture protection and light insulation such as electronic parts and components, precision machinery parts or equipments, chemical materials, LFP cathode materials, make-up, etc.

According to Customers’ Requirements

Making the surface resistance up to 105Ω to 1011Ω with different processes or formulas

Making products free of some chemical substances such as amide, silicon oil, chloride ion, etc. with different process or formula, so as to make them meet more demands of customers

Diversified types: envelop bags, ziplock bags (reclosable bags / zipper bags), organ bags, large three-dimensional square bags,mixed material structure bags, irregular shape bags , etc.

Custom-made: available to manufacture bags with different specifications, thicknesses and styles and print texts, patterns and trademarks on bags on the basis of no infringement upon others’ intellectual property rights.

Vacuum Pump Hot Seal Clear Nylon Vacuum Bags  

Vacuum bag (also known as nylon), the material is generally NY / CPE or PET / NY / CPE. This product has good anti-static function, the effect of vacuum-kai, a high degree of transparency, permeability (oxygen) gas rate is low, moisture resistant, and the tensile strength and puncture-resistant high strength, easy sealing, sealing, and the characteristics of aging is not easy. Mainly used for metal, electronic components, there is a need to vacuum packaging requirements. Dimensions, specifications, high temperature and so on made to order upon request. Also based on customer requirements, in the non-infringement of intellectual property rights of others, the printed text, logo, trademarks and so on, to help you enhance the corporate image.

Function Introduction
Also called as vacuum bag, this kind of bag characterizes in good barrier, heat sealing, low (oxygen) air permeability, good vacuumizing effect, high transparency, good moisture protection, high tensile strength and perforation resistance, good tightness, ageing resistance, etc. It is helpful to prevent product from dirt, dust, microbial and moisture and extend the product’s quality guarantee period after the product is vacuumized.

Material and Structure

This kind of bag has a transparent appearance, making objects inside it visible and providing convenience in identifying with a barcode reader. Its material is NY/CPE or PET/NY/CPE generally. 
Applicable Scope:
This kind of bag applies to the packaging of products with antioxidation requirement such as all kinds of circuit boards, electronic products, precision machinery components, consumables, industrial products, etc. For example, industrial packages of PC boards, IC integrated circuits, electronic parts and components, precision hardware, auto parts, military products, etc.
According to Customers’ Requirements:
Making the surface resistance up to 105Ω to 1011Ω with different processes or formulas;Making products free of some chemical substances such as amide, silicon oil, chloride ion, dust particle(reachs to thousand leavl standard),etc. with different process or formula, so as to make them meet more demands of customers;
Diversified types: envelop bags, ziplock bags (reclosable bags / zipper bags), organ bags, three-dimensional square bags, irregular shape bags , etc.;
Custommade: available to manufacture bags with different specifications, thicknesses and styles and print texts, patterns and trademarks on bags on the basis of no infringement upon others’ intellectual property rights.

 PE Bag

Material:Anti-static PE bag is first blow molded out from the compound of LDPE, LLDPE, anti-static additive, color pigment and stability ingredient , and then hot sealed and cut into bags.

Feature:This product has anti-static function as well as all characteristics that the common PE bag has.

Its material fells very soft and the thickness can be adjusted freely, which made it widely used to pack general electronical products like printed circuit board.

As an over-wrap, on one hand, it can economize cost, on the other hand, it can keep electronic components away from static damage caused by insulator rubs mutually.

Usage:It is the best choice for packaging PCB, for it can keep the PCB away from being damaged by effectively and timely releasing the static generated on the PCB.

Its technical indexes as following: method MIL-B-81705B; inner and outer surface resistance is between 108Ω and 1011Ω; time needed for static removal is less than 2 seconds.

Style: In accordance with customers required specification it can be make into sheet, coil, bottom seal bag and envelope bag. And in terms of color it can be customized made.

PE Bubble Bag

 Being blow molded from LDPE and LLDPE , relatively low cost and widely used ; 

Characteristics:

1) The bubble can create a good effect of cushioning .

2) It has already become a mature packing material.

3) The air bubbles can prevent products from damages due to collision, attrition or static.

4) It is mainly used for the packaging of electronic component and PC boards.

5) The surface resistance is :108-1011Ω.   

6)  It’s structure, size and color could all be customized.   

Use area

It's usually applies to pack light  products and the products don't need high standard in packaging. Prevent damage due to shock, pressure, collision, attrition and static.

Technical Parameters

Conductive Bag

Function Introduction

lBlack conductive bag has a good function of discharge, which has not only stable conductivity but also good shielding of light; it can effectively protect sensitive electronic parts and components from damage by electromagnetic wave and static, through reducing the static hazard generated due to friction during manufacture and transport and resisting external static.

Material and Structure:

 It has a black, non-transparent appearance, which is made from LDPE, conductive carbon black and anti-cavitation agent with the blow molding process. The surface resistance can be up to 103Ω to 105Ω.

Applicable Scope

It is mainly used to pack military products, aircraft products, network communication products, sensitive materials, instrument equipments, electronics, integrated circuits, chips, precision electronic components, etc.

According to Customers’ Requirements

Making the surface resistance up to 103Ωto 105Ω with different processes or formulas;

Diversified types: roll material, flap bags,envelop bags, ziplock bags (reclosable bags / zipper bags), organ bags, three-dimensional square bags, irregular shape bags , etc.;

Custom-made: available to manufacture bags with different specifications, thicknesses and styles and print texts, patterns and trademarks on bags on the basis of no infringement upon others’ intellectual property rights.

EPE/PO Film Bag

Description

· This kind of bag can keep components sensitive to static away from the potential static danger to the largest extent

· Its special four-layer structure can create such effect as an inductive cover to separate the goods inside from the static field

· Furthermore, the inner layer is made from low density polyethylene which can remove the static can avoid static generation inside the bag

· In addition, this kind of hot salable bag is translucence, so the good inside can be easily recognized from outside

· Surface resistance: ≤108 to 1,010ohm

· Meets: ASTMD257, ELA541 and MIL-B-81705

· Sealing can be open flat, ziplock, and 3D styles

· Customized sizes are welcomed

· All trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks.

The EPE material is made with antistatic agent has prominent anti-static property with a surface resistance of 106~1011Ω. The material is made through the thermal sealing lamination of pearl sponge, PE film and PO film. It can be made into coiled film, sheet material or bag based on the requirements of the customers.

Characteristics 

1) Tasteless and non-toxic.

2) Light weight, good flexibility and cushioning.

3) Low thermal conductivity and superior heat insulation 
4) Outstanding waterproof and anti-corrupt capability.

5) Thickness and size can reach customers' requirements.

6) Customized printing available

Usage

It is widely used in packing electric appliances, household appliances, mechanical parts, glass, wood furniture, handicrafts, ceramics and construction area.

Bubble Padded Bag

Our company is research and development of composite anti-static bubble bags to fill the domestic anti-static bag deficiencies. (Not a lot of complex anti-static bag, easy to leak a long time, and anti-static bag shock absorption cushioning poor performance) of the Department of my company's patent product, patent No.: ZL03 2 26123 `3.

The two-tier structure, the outer is shielding film, surface resistance is 10( 8- 11), anti-static bubble bag inner surface resistance value is10( 8- 11)

The product applies to oceangoing transportation electronics packaging. Anti-static bubble bags, bubble film prevents product handling in the production process due to collisions, caused by friction or static electricity damage. Mainly used in electronic components, PC boards, such as packaging.

EPE Foam

Polyethylene foamed cotton, also called as EPE foam, is a new type of environmentally friendly packaging material with a non-cross linking closed-cell structure. It consists of numerous independent bubbles produced after physical foaming of low density polyethylene, has advantages of moisture protection, shockproof, sound insulation, thermal insulation, recycling usage, environmentally friendly, high resistance to collision, which also has high resistance to chemicals, thus being an ideal substitute of traditional packaging materials.

EPE foam . Available with fixing elements like Elastic / Velcro / Adhesive / Cotton cords etc. These products are designed and fabricated keeping in mind the extent of protection required for every specific part of the vehicle.

Applications

Material Structure and Application

Key Words

•Packing film or bags for snack / chips / candy / biscuit / 

cookies / coffee / dried fruit /nuts / seeds / sea food / milk powder / protein powder / flour / pet food / rice / grain /sugar / instant food / pre-cooked food / frozen foods / spice / tobacco / honey / juice/ sauce / jelly / salt / cloth / washing powder/ detergent liquid / fertilizer etc
•Sealing/lidding film for PET/PVC/PE/PP cups or trays

 Moisture barrier Bags/Aluminum Foil Bag Metallic Foil Bags  ESD Bubble Cushioned Bag PE Bag  PE Grid Bag Conductive PE BagsFoam BagsAir Bubble Bag  Nylon Bag/Vacuum Bag