Detergent powder ribbon mixing machine

Specifications

1.dual ribbon stirring
2.plus additional layer
3.pneumatic valve
4.high speed in mix
nvection mixing

           Detergent powder horizontal ribbon mixing machine 

    

          

 

 I.General description:

• The Horizontal Ribbon Mixer contains three main parts: U-shape tank,auger and driving parts, with pretty high effect in mixture. The auger is dual structure, outer spiral make the material move from the sides to the center of the tank and the inner screw convey the material from the center to the sides,which is helpful to get convective mixing.
• Our ribbon blender fits for different kinds of powder, granules which accompany with little sticky or cohesive in its composition. This type of machine can also add liquid, spice and paste into powder,besides that, the lid of the tank can be made as open in order to easily cleanup or change parts.

 

II.Characteristics

 

 

 1.With horizontal U-shape tank,a single shaft with two ribbons in symmetric

 

  distribution.At the top of tank lid,there is an entrance for material,of course we can

 

  meet the requirements with equipping the device of spraying or adding liquid.

 

 

 

2.No material deposit and without dead angle when mixing.There is a flap dome  valve(pneumatic or manual controller)of the center at the bottom of the tank. The design of the valve is in an arc which assures no material to deposit or exists any dead angle when mixing. With tight interlock and reliable seal,it helps to keep from leaking any material under the circumstance of frequent switch on or off.

 

 

 

3.Durable&Safety: All material are made of Stainless Steel 304.Considering its high quality, these series machine are successfully awarded with CE certification.

 

 

 

4.Optional choice:This type of machine can also be designed to function as cooling or heating. Adding a layer outside the tank to forming into a U-shape hollow interlayer,among which we can put into some particular medium to gain the effect of cooling or heating,usually, injecting cooling water or heated steam,and in some case,it can also use electrical machine for heating.

 

 

 

                                                               disconnecting partial views 

 

 

                                                                  Pneumatic  discharge hole

 

 

 

III.Technical parameters

 

 

 

Model	TDMP200	TDMP300	TDMP500	TDMP1000	TDMP1500	TDMP2000
Effective Volumn	200L	300L	500L	1000L	1500L	2000L
Fully Volumn	280L	420L	710L	1420L	1800L	2400L
Turning Speed	46rmp	46rmp	46rmp	46rmp	46rmp	46rmp
Total Weight	250kg	350kg	500kg	700kg	1000kg	1300kg
Total Power	4kw	5.5kw	7.5kw	11kw	15kw	22kw
Total Length	1370	1550	1773	2394	2715	3080
Total Width	834	970	1100	1320	1397	1625
Total Height	1647	1655	1855	2187	2313	2453
Barrel Length	888	1044	1219	1500	1800	2000
Barrel Width	554	614	754	900	970	1068
Barrel Height	637	697	835	1050	1155	1274
Radius of Barrel	277	307	377	450	485	534
Power Supply	3P AC208-415V 50/60HZ

 

 

  IV.Qualification & Certification