Finseen self-defense 868MHz home security Cloud IP Alarm System

Specifications

FSK 868mhz technology
Notify by PUSH/e-mail via the internet;
No sim card, no monthly fees;
Support Andriod & IOS app.

 

The system is a DIY system with a minimum of setup. Just download and install the IP Alarm app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet.Check that your mobile device is connected to the internet. Enter the alarm ID and password in the app and follow the guides. Please, study the help sections for further details and learn more about the individual components in this introduction.

The alarm system is a plug and play cloud network home security system. Built-in siren automatic detection, the home wireless alarm system drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to users, either by PUSH or e-mail.  All control is done by the app.

 

 

 

 

 

 

 

Feature:

 

 

1. IP Cloud Alarm sends out notifications via PUSH and e-mail.

 

2.  IP Cloud Alarm event logs are controlled by the cloud and always correct updated.

 

3. Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.

4.  Learn Remote Control and Detector ; Delete Remote Control and Detector.

5. Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.

6. Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

 

7. Support setting alarm zone with intellegent door sensor function: triggerred by open or close door, and upload Status of Alarm zone

 

8. Can be set with 99 wireless zone, and each zone can learn 1pc of accessories.

 

 

 

IP Alarm APP interface:

 

            

 

 

           

 

 

 

• Arm	All devices within the Finseen IP Alarm System are armed; this can  be set using the remote tag or Finseen smartphone app. Upon choosing  "Arm", users will have 60 seconds to exit the premises before the  security system takes effect.
• Disarm	All devices within the Finseen IP Alarm system are now disarmed; this can be done through the remote tag or Finseen smartphone app.
• Home Arm	Connecting the home security, secures the doors and windows in the  system whilst your motion sensors stays inactive so you can stay in  the house without the alarm sounding.
• Panic	Selecting this will activate the Finseen built-in siren,  Finseen smartphone APP Siren or external Siren.

 

 

System setup in IP Alarm app	1) Arm delay (Exit delay)   2) Alarm delay (Entry Delay)   3) Siren enabled/disabled
Setup devices in IP Alarm app	1) Setup devices in IP Alarm app   2) Delete devices   3)  Name devices
Setup notification service in IP Alarm app	1) Email receiver   2) Push receiver
Sensor system capability (Total: 99)	1) 10 pcs Remote controls   2) 19 pcs Smoke detector or gas detector   3) 40 pcs Door /Window sensor   4) 40 pcs Motion detectors

 

 

  

 

 

 

 

 

 

 

 

 

 

 

1. All products have been strictly Quality Checked before packing.

2. All products have been well packed before shipping.