ET 5100A Portable Emissions Flue Gas Analyzer

  Equipped with built-in air pump, ET5100A draws in sample gas through its the sampling probe  with temperature sensor. Users can choose to have the gas analyzed by a variety of electrochemical sensors or non-dispersed infrared detector for determining the gas pressure, temperature, and the concentration of O2, NO, NO2, SO2, CO2, CO and other content elements in the sample. The instrument is also capable of calculating actual emission rates of the gas analyzed.

- Large storage capacity; able to store a maximum of 500 sets of data; greatly enhances the storage and retrieval of data
- Real time print-out of test results by built-in printer
- Can accommodate as much as 6 sensors
- Modular circuit design enables automatic identification of sensor types
- Users can specify their required measurement standards in the instrument
- Use of real time excess oxygen coefficient (Excess Air Lambda) enables the correct adjustment of pollutant concentrations
- Use of Pitot tube (optional accessory) enables automatic calculation of flue gas flow rate
- Calculation of emission rates based on actual flow rates
- Accuracy of test results is enabled by the use of pre-treatment device (optional accessory)
- Able to function without AC power as a result of built-in batteries
- The use of standard sampling sensor probe (probe length: 0.3 meter and length of flexible hose: 3 meter) which includes a temperature sensor and some basic treatment devices for gases
- Powerful software enables users to input excess oxygen coefficient (Excess Air Lambda) and fuel coefficient

ET5100A can be used to analyze flue gas emitted from various types of industrial furnaces, incinerators, vehicular emission and boilers used by the power generating industry, metallurgy, environmental industry, industrial safety monitoring and the scientific research sectors; it can also be used to analyze other environmental gaseous emissions, and for verification of FGD and DE-NOx system performance.

Product specifications

* LCD display (128x64 Pixels)
* Sample flow: 1L/m with build-in flow control / internal gas pump
* Sampling probe (300mm x 8 mm) up to 500 degree C (with type K thermo coumple) and 2m sampling hose (optional 1000mm sampling probe with additional price)
* Gas detection: electrochemical gas sensor, max. for 6 type of gases
* NDIR CO2 sensor: optional
* Build in thermo printer
* Power consumption: < 75W
* Size: L417 x W234 x H318 mm
* Weight: <10kg (depending on configuration, the actual weight may vary)

Working environment
* Ambient Temperature 0-40 degree C
* Relative humidity - not more than 95% RH non-condense
* Good ventilation and no leakage of gas from samples awaiting to be tested
* 12V DC c/w built-in 6V x2 lead-acid batteries.

# Gas sensor is the optional selected