wireless network bridge

Specifications

High performace; High transmission Speed;
High power output(500mW);
High technology for crypto security;
Easy installation

 Product features
High performace:
Because of the high stability, high power output and 2x2MIMO technology, the AN2 can realize higher transmission speed and longer transmission distance;

High transmission Speed:
The actual maximum data transmission speed can be up to 150Mbps, which can meet the requirement of high data throughout;
High power output for longer transmission distance:
High power output(500mW) improves the receiving sensitivity of the whole system. The transmitting range can be up to 50km;
Flexibility for networking mode:
AN2 supports many kinds of networking mode such as: point to point, point to multi-point. It can be used as a wireless bridge or switch;
High technology for crypto security:
Supporting WEP, WPA, WPA2 encryption, MAC address filtration;
Easy installation:
Because of easy installation, users can set the whole system easily without any special tools.

Technical features
Signal strength can be shown by different colour bars;
2×2MIMO technology improves the spectrum utilization and strengthens the performace of data transmission;
Visual signal strength showing by colour bars and numeral reading;
advanced frame aggregation model to improve spectral efficiency,Increase the effective data transfer rate;
Support CPE end-user mutual isolation;
intuitive device with color-coded signal strength display panel,The colors represent the signal strength value can be user-defined,convenient for installation and commissioning;
Support 5M/10M Bandwidth;

Support frequency extension function, 40Mhz of dual channel binding can effectively improve communication performance;
proprietary frequency transfer function ,possible to avoid same frequency interference problem,at the same time strengthen wireless network privacy and safety;

user controllable CPE channel scan list,upgrading CPE scanning speed, speed up the connection time to the AP;
bottom-line flow control function,The effective realization of the balance for the flow of connection channel;

Practical PING watchdog reset function,can try to restore communication by using system automatically reset in an exception;
Based on MAC address, ACL(access control list) can effectively improve the system safety and Prohibit unauthorized access;
support the bridging mode and routing mode;
Support STP(Spanning Tree Protocol);

firewall within, rich in user-defined function of filtering table;
Support PPPoE virtual dial-up, can use ADSL-peer network for remote connections;
supports multicast (Multicast) routing function;
Support dynamic frequency selection (DFS) technology;

Compatible with802.11a/n standard protocol wireless terminals;
Support SNMP agent;

Support TELNET,SSH service;
Support remote logging.

System information
CPU spec	Atheros MIPS 24KC,400MHz
Memory spec	64MB SDRAM,8MB FLASH
Network interface	One 10/100M Ethernet interface(5 type cable,RJ45)
Certificates
Wireless module standard certificate	FCC Part 15.247, IC RS210, CE
RoHS certificate	support
Transmission range
LOS (with outdoor antenna)	>50Km
Physical Spec/Power supply properity/Environmental requirement
Size	16cmL×8cmH×3cmW
Weight	0.5kg
RF connector	2 RP-SMA (waterproof)
Outline design	outdoor portable U/V type groove
Power consumption	6watt
Working power supply	24V DC,1A,(POE)
Power supply mode	POE(4,5+;7,8-)
Working temperature	-30°C~75°C
Working humidity	5%~95%
Shakeproof standard	ETSI300-019-1.4

Working frequency range: 2412-2462 MHz