Axial flux permanent magnet generator(AFPMG550-3.0kW/180rpm)

Specifications

High efficiency at low speed;Small dimension and light weight;Very small maintenance costs;small starting torque;no noise;clean.

• Standard Parameter and Technical Curves

• Constructions and Materials

• Advantageous Features

• Main Applications of Axial flux permanent magnet generator

1. Small wind generators(SWT)
2. Small electrical generators driven by gasoline or diesel engines
3. Electric vehicle drive machines, as motor and generator.
4. Hydro Power

• Typical Model

 

• Options
  Rated power: 0.1KW-15.0KW
  Rated speed: 100RPM-1200RPM
  Rated voltage: 14VDC-400VAC
  Generator outer diameter: 110mm-770mm
  We can customize products according to customer requirements
  We can do OEM (Original equipment manufacturer) for customers
   
• Checklist Category
  1. Dimension and tolerances
  2. Output power, voltage and RPM
  3. Insulation resistance examination
  4. Starting torque
  5. Output wire (Red, white, black, green/earth)
   
• Operating Instructions
  1. Working condition: under an altitude of 2,500 meters, -30 ° C to +50 ° C 
  2. Before installation, gently turning the shaft or housing to confirm rotation flexibility, no abnormal sound.
  3.Output of Axial flux permanent magnet generator(AFPMG) is three-phase, three-wire output, before installation, use 500MΩ Megger to 
  check the insulation resistance between the output wire and case, should not be less than 5 MΩ 
  4. If  Axial flux permanent magnet generator(AFPMG) is inner rotor generator, in the installation process, should ensure that the locking screw in place, it is very important. 
   
• Warranty: 2-5 years