battery manufacturer 12v26ah SLA battery for telecommunication use AGM vrla battery

12v7ah GEL storage battery

Application 12v26ah selead lead acid battery

Why Choose Us

1.  Price cheapest --- complete production line

2.  29years history---Before was Sino-Japanese joint venture government

3.  Quality 100% pass testing

4.  Payment term. LC .DA .DP .OA etc.

5.  Fast service.  

  Lead-acid battery 12V26AH

Product specification :

1.data sheet

  maintenance free 12v7ah sealed acid battery for electric equipment and telemeter equipment

 12v26ah deep cycle battery

2.Detail Specialties

1. Absorbent glass mat (AGM).The glass –fiber separator in HENDA SLA battery are made with advanced technology – this high porosity of the separators retains adequate electrolyte for the reaction with active material of the plates.

2. It’s designed to operate for up to 10 yearsat 20°C on the basis of accelerated tests

3. If depth of discharge is 30%, cycle service lifecan reach maximum at about 1000 times.

4. Its warranty is 3 yearsfor proper use in telecommunication.

5. Battery case is making of fire proofs material therefore the case is very strong. It can avoid the fire.

6. Its using insert terminal. And it is not only beautiful but also easily distinguished and installed.

7. Maintenance free As it is valve-regulated sealed. Glass -mat is utilized acid is trapped inside .It is leak proof and refilling is no needed.

8. High power -to-weightratio –HENDA SLA batteries can provide much power in comparison to its Weight

9. No Memory Effect. - Some batteries say nickel –cadmium batteries. It will become conditioned to provide less power after repetitious short usage /discharge.

10. Low self discharge–the self –discharge rate for HENDA SLA. Battery is about 2-3% per month at room temperature compared with 20-30% for other common battery systems.

11. Longer service life–utilized thick and massive calcium grate ensure that HENDA SLA battery has a longer service life

12. High discharge rate -since the internal resistance is low, the battery can provide high rate of discharge

13.Wide operation temperature range– HENDA SLA battery capacity is rated at 20 °C, and will operate from -20°Cto + 60°C when it is fully charged. Ambient temperature is 20°C, service life will be more efficient under 15°C to 25°C..

14. Easy of shipment- It is classified as non- dangerous goods and is acceptable to be shipped on passenger and cargo

3.The construction

1. Positive electrode plates

Positve plates are made of lead –calcium alloy with special chemical fromula

2. Negative Electode plates

Negative plates are made of lead – ehemical fromula

3. separator

The glass – fibre separator in HENDA SLA battery are made with advanced technology –this high porosity of the separators retains adequate electrolyte for reaction with active matterial of the plates .

4.safe valve

The valve system which operaters from 1 psi to 6psi (0.07-0.43kg/cm3) is designed to relaease excess gas and keep the internal pressure within the optmum range of safety .it protects the negative plates from contamination from oxygen in the air valve are 100%visually inspected during battery production

If the internal pressure is increased to an abnormal level during overcharge ,the safety valve ill be opened to release gas . it thus eliminates the danger of repture .once it has opened m it automatically closed in preparetion for future excessive increase in pressure.

5. Terminal

Depending on the battery model in MICRO series ,the terminals may b e fasten rype , bolt –and nut type , pressue contact type ,cable –and connector type or other special types

Terminals of MEDIUM series and MACRO series are threaded –insertion type of bolt –and nuts types

Construction of threaded-insert strud

3.case

For 6v ,8v and 12v batteries ,standard container are manufactured from ABS plastic resin (UL94HB),It is optinal to use flame retardant ABS plastic resin (ul94vo)

Each 6v battery has 3cells .8v battery have 4cells and 12vbattery has 6cells

7Epoxy

The ABS platic cover and container are sealed by a special expoxy that is acid resistant . 

2.DESCRIPTION OF HENDA SEALED LEAD ACID BATTERY

2.1 BATTERY PROPERTIES

Maintenance free  as it is value-regulated .sealed and glass  mat is utilized .acid is trapped inside .so refilling is not needed and is leak proof.

High power  to-weight ratio –HENDA SLA batteries can provide much power in comparison to its Weight .for example 6v and 12v MICRO series battery capacity range of room 0.8ah .to 28ah. Weight range  only from 0.3to 9.5kgs .

NO Memory Effect .-some batteries say nickel –cadmium batteries.will become conditioned to provide less power after repetitious short usage /discharge .

No memory effect – some batteries .say nickel –cadmium batteries will b3ecome conditional  to provide less power offer repetitious short usage /discharge

Low self discharge –the self –discharge rate for HENDA SLA . battery is about 2-3% per month at room .temperature compared with 20-30% for other common battery systems .

Longer service life –utilized thick and massive calcium grate ensure that HENDA SLA battery has a longer service life over 15years .

High discharge rate .since the internal resistance is low .the battery can provide high rate of discharge

Wide operation temperature range – HENDA  sla battery capacity is rated at 20”C, and will operate from 15”C (5f)+50”(C (122F)when it is fully charged Ambient temperature is 20”C.service life will be more efficient under 15’C to 25”C / 

Production flows:

  Lead-acid battery 12V100AH

Quality control:

1. original material inspection : 99.9999% pure lead .

2. ABS Battery case testing :  Anti - impact / Prevent Burst.

3. Meaure each battery acid  electrolyte weight - Ensure the consistency of every battery

4. Charing & discharge testing : deep cycle working

5. Each battery inspection Before Shipping : Guarantee 100% pass rate. 

Sealed lead deep cycle life DOD sheet :

 Factory profile:

 Our certificate:

 Our main fair and cooperated customers :