Save 20% Hot selling Toslink/SPDIF digital audio signal to analog R/L or 3.5mm audio converter for home theater sound system

Introduction

The Digital to Analog audio converter is designed for either household usage or professional audio application. It converts Toslink/SPDIF or Coaxial digital audio signal to analog R/L or 3.5mm audio. it can support an extenal devices such as an amplifier via standatd RCA-Style jacks and a stereo headphone via its 3.5mm at the same time.

Features 

* Converts SPDIF Optical or Coaxial digital PCM audio input to analog stereo L/R RCA and 3.5mm Cable outputs simultaneously 

* Supported sample rates including 32kHz 44.1kHz, 48kHz, 96kHz and 192kHz, up to 24-bit resolution

* Ultra low jitter and high fidelity design using new receiver & D/A converter chips 

* Auto sensing input selection with priority given to SPDIF; disable / disconnect SPDIF input for coaxial Input application

Specification

Connection Diagram & Operation

Before installation, please make sure all devices you wish to connect have been turned off.

1) Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables.

2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate R/L cable.

3) Insert USB Power Cable into the converter and then connect the AC side of the power supply into the wall outlet. 

Note: When connected to the Toslink and Coax cables at the same time, the product will give priority to Toslink input

Attention: Insert / Extract cable gently.

  Package Contents

* Main Unit x1        * USB Power Cablex1       * User Manual

   Payment & Shipping

Company Information