Newest CLT/A Series Combined Spiral Cyclone Dust Purifier Powder Dust Separating Project

Specifications

Powder Dust Separating Project
1.Basic cyclone dust collector:spiral cyclone dust collector
2.Long life time
3.Low cost

Powder Dust Separating Project Powder Dust Separating Project Powder Dust Separating Project

 

 

 

Features of Dust Purifier Powder Dust Separating Project

 1.Large air volume, free combination

 2.Low in cost, long service life

 3.Good separation effect for coarse dust particles

 4.Preliminary treatment for multi-stage dust removing

Operating principle of Dust Purifier Powder Dust Separating Project      CLT/A type spiral cyclone dust remover is the basic type of cyclone dust remover, and also of spiral type. Its cover plate is in spiral tangent shape with a down-tilting angle of 15°. Dust air backspin along the tilting cover plate instead of forming up ash loop, which can remove small swirling air stream formed by upward flow of the incoming air stream, reduce energy consumption and improve dust removing efficiency.  It is applicable to dust removing of high density, dry and non-fibrous dust particles.

    CLT/A type cyclone dust remover is composed of cyclone cylinder, dust collecting hopper and spiral case ( or wind collecting cap) . It is divided into single cylinder, double-cylinder, three-cylinder, four-cylinder and six-cylinder based on the number of cylinders. Each type sends out air in two ways: X type (sending out air horizontally) is used in negative pressure operation; Y type (sending out air from above) is used in positive and negative pressure operations.

Application scope of Dust Purifier Powder Dust Separating Project       It’s especially applicable to high temperature and high density dust industries, widely used in metallurgy, casting, sand blasting, building materials, power industry and fire proof materials

 

 NANFANG brand CLT/A-4.5 and series single cylinder cyclone Dust Purifier technical parameters:

 

 

Production process

1. CNC Laser Cutting

 

 2. Bending

 

 

 3. Welding

 

 

  4. Assembling:

 

 

 5. Testing:

 

 

6. Packing:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contact way

          

  We are professional at manufacturing dust collector since 1996.

              We are sincere to hope that there's a coopration between us.

 

Powder Dust Separating Project Powder Dust Separating Project Powder Dust Separating Project