Advanced technology high quality red brick production line, red brick machine production line

Specifications

red brick production line:
1) 30 years' development
2) 6 years' export experience
3) reliable service

Advanced technology high quality red brick production line, red brick machine production line

 

Lantian Mechanical Plant brick

 

Lantian Mechanical Plant was founded in 1980s. It has been a professional  red brick production line making

 

plant for over 30 years. Our brick production line includes automatic feeder, roller crusher, red clay brick 

 

machine, brick cutter, brick stacker, belt conveyor, mixer, kiln car, etc. and our engineer also can install the red

 

brick production line for you, and about the kiln, we will guide you to build it.(red brick production line)

 

 

 

The whole process of red brick production line

 

Red brick production line includes box feeder→ Roller crusher/ Jaw crusher→Double shaft mixer→Finess 

crusher→ Extrudering mixer →Red brick machine→ Brick slitter→ Brick cutter→Brick Stacker→Kiln Car→

Kiln.(red brick production line)

 

1. Raw material & fuel preparation and handling

 

 1)Send your raw material(stone dust, clay, slag, etc.) to box feeder with loader.  Then through automatic feeder,

raw material being send to roller crusher for preliminary crushing .

 2)Preliminary crushed material is conveyed to double-shaft mixing machine for adding water and agitating

through belt conveyer. 

 3)After mixing of the first working procedure, the raw material is again sent to intense agitation extruder

and high speed fine pulverizing double roll grinder for supplement water and agitating the raw material. 

(red brick production line)

 

 2. Molding

 

1)The molding water content rate should be controlled within 16%-18%. 

2)The vacuum pump will take out the air that entered into the extruding machine together with pug. The

full automatic clay brick machine will extrude the pug from machine mouth and then, carry out slitting &

parting according to the required dimension.(red brick production line)

 

3 Cutting and placing process

 

1) Using brick cutter to cut brick log into small bricks.

2) Using brick stacker to place bricks on the kiln car. (red brick production line)

 

4) Drying

 

1)When the unfired bricks cut by cutter and arranged into groups. 

2) The drying chamber work system has heating system, regulating system and moisture excluding system.

The drying quality is controlled by regulating system. And there are two kinds kilns for your reference: If you 

want to save place, manual power, and want to more automatic, tunnel kiln is a good choice for you; If you

want save money, soil kiln is a good choice.(red brick production line)

 

 5. Burning

 

1)After drying , the unfired bricks are sent onto  kiln by the dried brick cart,stacking bricks onto the kiln car 

for burning. 

2)unloading system The properly burned bricks.(red brick production line)

 

 

What's red brick production line?

 

Red brick production line is suitable for shale, coal gangue, clay and other raw materials to produce all kinds

of hollow brick, standard clay brick. Red brick production line addopts upper and lower structure. The upper 

and lower transmission adopts ZQ type national standard reducer, the axial pneumatic clutch, and the whole 

engine is totally welded by steel plate. The surface of the rimer uses wear-resisting material spray welding 

process to prolong its service time. (red brick production line)

 

Red brick production line show

 

1) Automatic feeder(red brick production line)

 

 

2) Roller crusher(red brick production line)

 

 

3) Double-shaft mixer(red brick production line)

 

 

4) Red brick machine (red brickproduction line)

 

 

5) Brick cutter(red brick production line)

 

  

 

6) Brick stacker(red brick production line)

 

 

 

 

Different sizes and shapes bricks made by red brick production line

 

(Our red brick production line can produce different shapes and sizes clay bricks according to 

customer's demands)

 

 

 

 

Main parameter of red brick production line

 

Type	Diameter of reamer of extruding end (mm)	Capacity (pieces(standard brick size)/h)	Authorized pressure(Mpa)	Vacuum Degree(Mpa)	Installed capacity(kw)	Dimension(mm)
JKY70/70-2.5	700	19000~24500	2.5	-0.092	250+90+1.5	6687×6765×2846
JKY70/60-3.8	600	14000~15000	3.8	-0.092	250+90+2.2	6632×6855×2866
JKY60/60-4.0	600	21000~24480	4.0	-0.092	250+90+7.5+1.5	4819×6416×3065
JKY60/50-4.0	500	12000~18000	4.0	-0.092	200+75+1.5	5844×6102×2796
JKY50/50-4.0	500	12200~13420	4.0	-0.092	200+90+7.5+1.5	6904×5352×2820
JKB50/45-3.0	450	9800~15100	3.0	-0.092	132+55	5375×4521×2723
JKR50/45-2.0	450	12000~16000	2.0	-0.092	110+55	4900×4204×2723

 

Installation of red brick production line

 

1) Red brick production line should be installed in a horizontal concrete, fixed by foundation bolt.

2) Red brick production line's main body should be located vertically with ground.

3) After all the machines of red brick production line being installed, we should check each part, each bolt,

host storehouse door to see whether ther are tight or not.

4) Confirming the power and control switch according to press mud  and its assistant machine's power.

5) Check finished, we should have a empty load test first. If the test is ok, we can make normal production.

 

Work site of red brick production line show:

 

 

 How to choose the most suitable red brick production line for you?

 

1) At first, I need to know your raw material. 

2) Second, I need to know the brick size, shape.

3) Third, I need to know how many pieces your will make per hour or per day.

4) Fourth, what/s your bricks' application?(red brick production line)

 

Delivery site of red brick production line

 

Visitors came to see our red brick production line work site

 

 

 

Contact: