hardmetal tungsten carbide wire guide

Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire.

Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. 

High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC);

Hot hardness (up to 900 ~ 1000 °C, keeping 60HRC);

Good wear resistance

There are V-groove, R-groove, U-groove trough over other.

V-groove with 90 °, 110 °, 120 °, and other specifications, R-groov ranging from R0.2 to R25. Diameter φ1-φ500mm available.

 Our primary goal here at ZZ HARDMETAL is not aiming for a quick profits but the successful cultivation of an ongoing and sustainable business relationship. Give us a call or drop us an E-Mail and tell us about your ideas and visions – we can help you solve your problems and achieve your goals.

Shipping

i

Professional Chinese manufacturer of Tungsten Carbide products for 20 years.

Specialized in TUNGSTEN carbide wire guides,shims, wear parts, drilling bits, carbide rods, drawing dies, cold forging dies and customized products.